EPA REGION 10 DIVE UNIT SURFACE SUPPLY UMBILICALS AND CASES TWO SURFACE SUPPLY UMBILICALS, 300' EACH, ONE C…

Public award description

EPA REGION 10 DIVE UNIT SURFACE SUPPLY UMBILICALS AND CASES TWO SURFACE SUPPLY UMBILICALS, 300' EACH, ONE CABLED CAMERA, AND PELICAN CASES. THE SYSTEM WILL BE USED FOR POLLUTED WATER AND SHOULD BE CONFIGURED FOR DECONTAMINATION WHERE POSSIBLE (E.G. THE TWISTED UMBILICAL IS MORE CONDUCIVE TO DECON.). UMBILICALS WILL BE PROVIDED WITH: 1. END PROTECTIVE COVERS AND 4 SPARES (NEOPRENE OR SIMILAR MATERIAL TO COVER COMM CABLE, PNEUMO HOSE, AND AIR SUPPLY HOSE AND PREVENT DUST/DEBRIS/INSECTS FROM ENTERING). 2. PELICAN-TYPE WATER TIGHT SHIPPING COMPATIBLE CASES (2) WITH ROLLERS TO HOUSE EACH UMBILICAL, WITH THE UMBILICAL DELIVERED STOWED IN ITS CASE. 3. THE SURFACE SUPPLY UMBILICALS SHALL BE SHIPPED FULLY READY TO DIVE AND CONFIGURED FOR USE WITH AN INTERSPIRO AGA FULL FACE MASK WITH OTS HIGH USE WET CONNECTOR COMMUNICATIONS AND VIKING PRO MAGNUM DRYSUIT (SUIT, MASK NOT INCLUDED) INCLUDING ASSOCIATED COMMUNICATIONS APPURTENANCES. 4. UMBILICALS SHALL BE MARKED IN FEET WITH ELECTRICAL TAPE OR SIMILAR IN COMPLIANCE WITH OSHA COMMERCIAL DIVE STANDARDS. 5. UMBILICALS SHALL BE READY TO DIVE WITH D RING ATTACHMENTS ON DIVER AND CONTROL BOX ENDS (4 ATTACHED D RINGS 45-10D (NAVY) SHACKLE WITH D-RING ON DIVERS END AND D-RING ONLY ON SURFACE END). 6. 2 TU200-3 300' TWISTED UMBILICAL, 3-PART W/ALL FITTINGS&CONNECTORS "READY TO DIVE" (WITH A KMACS 5 CONTROL BOX), PLUS VIDEO CABLE (SEE BELOW) ON ONE UMBILICAL; 7. VENDOR TO PROVIDE OTS HIGH USE CONNECTOR ON DIVER END, BANANA PLUGS ON CONTROL BOX END OF UMBILICALS, COMPATIBLE WITH KMACS-5. 8. ONE UMBILICAL SHALL INCLUDE THE LATEST STANDARD DEFINITION SPLASH CAMERA HTTP://WWW.SPLASHCAM.COM/DV_COLOR/DV.HTM WITH AT LEAST 300 FOOT CABLE LENGTH, INSTALLED (4 PART TWISTED UMBILICAL) WITH ALL APPURTENANCES (SOFTWARE, USB CAPTURE HARDWARE TO INCLUDE AUDIO CAPTURE CAPABILITY FROM KMACS 5 OUTPUT) TO CONNECT TO A STANDARD LAPTOP COMPUTER (LAPTOP COMPUTER NOT PROVIDED) AS WELL AS A DC POWER PLUG TO POWER THE CAMERA AND PROTECTIVE NEOPRENE TYPE COVER FOR STOWAGE OF THE CAMERA. 9. ITEMS MUST BE DELIVERED (FOB) PROPERLY COILED INSIDE PELICAN TYPE CASES WITH ROLLERS NOTED ABOVE. ALL HOSES WILL BE TESTED (VENDOR TO PROVIDE PROOF OF PRESSURE/PULL/HYDRO TESTING) AND READY FOR USE.