SUPPLY ALL LABOR, MATERIAL AND EQUIPMENT TO COMPLETE THE FOLLOWING: SEAL TIE-BACKS WITH PERMAFLASH DETAIL A…

Public award description

SUPPLY ALL LABOR, MATERIAL AND EQUIPMENT TO COMPLETE THE FOLLOWING: SEAL TIE-BACKS WITH PERMAFLASH DETAIL AND INSTALL JM DYNACAP SET IN COLD PROCESS ADHESIVE. SEAL ALL LIGHTNING ROD PENETRATIONS AT THE TOP OF THE PIPE TO PREVENT WATER INFILTRATION INTO THE BUILDING. AT PARAPET WALL LOCATIONS, REPAIR ALL VISIBLE CRACKS IN ROOF LOCATIONS. GRIND OUT CRACKS AND RE-FILL VOIDS WITH MORTAR. RE-FILL ANY OTHER DEFECTS IN WALLS WHICH MAY LEAD TO MOISTURE PENETRATION INTO ROOF SYSTEM. RE-SEAL ANY BRACKETS WHICH ARE ANCHORED TO PARAPET WALL LOCATIONS. AT CONDUIT PIPE DROPS, SEAL BRACKETS WHICH ARE ANCHORED TO SIDING. AFTER REPAIRS HAVE BEEN COMPLETED IN PARAPET WALL LOCATIONS,CLEAN AND APPLY TWO COATS OF THOROSEAL ELASTOMERIC MASONRY PAINT AT ROOF PARAPET WALL AREAS (COLOR TO BE CHOSEN BY OWNER) THIS WILL SEAL ANY OTHER DEFECTS AND WILL COVER OVER VISIBLE REPAIR SITES. UPPER ROOF: INSTALL THOROSEAL CLEAR SEALANT AT REPAIR AREAS. AFTER LIGHTNING ROD HAS BEEN INSTALLED, FLASH WITH JM PERMAFLASH DETAIL. AT FIVE LOCATIONS, REMOVE DUCT TAPE FROM METAL PANELS AND RE-INSTALL NEW METAL AT THIS LOCATION. REMOVE WOOD BLOCKTING FROM METAL PANELS AT TWO LOCATIONS AND MAKE PERMANENT REPAIRS TO THESE AREAS. INSTALL NEW SLIPSHEET UNDER WOOD BLOCKING AT SBS ROOF LOCATION. AT WALL SUBSTRATE BY LADDER LOCATION, INSTALL JM PERMAFLASH DETAIL WITH JM DYNAFLEX ON TOP. AFTER ALL REPAIRS ARE MADE, REMOVE DEBRIS FROM JOBSITE. INCLUDE SCOPE OF ROOF REPAIR AT ANTENNA BASE