***************************************************************************** AWARDED IAW BPA GS-07BSTIN ES…

Public award description

***************************************************************************** AWARDED IAW BPA GS-07BSTIN ESTABLISHED 05/26/2009 AND THE FOLLOWING IPD: NSN: 5345-01-367-7682DISK, ABRASIVE: SHALL CONFORM WITH THE LISTED SALIENT CHARACTERISTICS AND MANUFACTURED IN ACCORDANCE WITH THE FOLLOWING ANSI AND ASTM INDUSTRY SPECIFICATIONS: TYPE - ALUMINUM OXIDE GRIT - 120 BACKING - " A" WEIGHT, PAPER COATING - CLOSED COAT GRADE - NON-WATERPROOF STYLE - PLAIN FLAT, NO ARBOR HOLE WITH PRESSURE SENSITIVE ADHESIVE BACKING (PSA) & SHALL BE FUNCTIONALLY COMPATIBLE WITH 3M-STIKIT-D/F GOLD WITH 6 PRE-PUNCHED HOLES FOR DUST FREE SANDING BOND - RESIN OVER RESIN SIZE - 6INCH OUTSIDE DIAMETER USAGE DESIGNATION - METAL WORKING UNIT OF ISSUE - BX (125 DISKS PER ROLL; 10 ROLLS (1250) DISKS TOTAL PER BOX) ANSI B7.7 - SAFETY REGULATIONS FOR ABRADING MATERIALS WITH COATED ABRASIVE SYSTEMS ANSI B74.18 - SPECIFICATIONS FOR GRADING OF CERTAIN ABRASIVE ON COATED ABRASIVE PRODUCTS APPLICATION FOR COPIES OF ANSI STANDARDS SHOULD BE ADDRESSED TO THE AMERICAN NATIONAL STANDARDS INSTITUTE, 11 WEST 42ND STREET, NEW YORK, NY 10036. ASTM D828 - TEST METHODS FOR TENSILE BREAKING STRENGTH OF PAPER AND PAPERBOARD ASTM E 29 - STANDARD PRACTICE FOR USING DIGITS IN TEST DATA TO DETERMINE CONFORMANCE WITH SPECIFICATIONS APPLICATION FOR COPIES OF ASTM STANDARDS SHOULD BE ADDRESSED TO ASTM, 100 BARR HARBOR DRIVE, WEST CONSHOHOCKEN, PA 19428-2959. TAPPI STANDARD T 410 - GRAMMAGE OF PAPER AND PAPERBOARD (WEIGHT PER UNIT AREA) APPLICATIONS FOR TAPPI STANDARDS SHOULD BE ADDRESSED TO: TAPPI, 15 TECHNOLOGY PARKWAY SOUTH, P.O. BOX 105113, NORCROSS, GA 30092, TELEPHONE: 404-446-1400, FAX: 404-446-6947 PAPER BACKING. THE ABRASIVE PAPER SHALL BE COATED WITH ABRASIVE MATERIAL ON ONE SURFACE (SIDE). THE BREAKING STRENGTH OF THE BACKING SHALL BE TESTED IN ACCORDANCE WITH ASTM D828 AND MEET THE MINIMUM REQUIREMENTS SPECIFIED IN TABLE 1. THE COATED PRODUCT SHALL BE TESTED IN ACCORDANCE WITH TAPPI STANDARD T 410. ABRASIVE GRAIN: THE ABRASIVE GRAIN SHALL BE CRUSHED AND GRADED IN ACCORDANCE WITH ANSI B74.18. SHALL BE EVENLY DISPERSED AND COMPLETELY COVER THE SURFACE OF THE BACKING. ADHESIVE: ANY GOOD QUALITY ADHESIVE IS ACCEPTABLE PROVIDING THAT DISLODGING OF ABRASIVE GRAIN IS MINIMIZED. ABRASIVE COVERAGE: OPEN COAT - 50 TO 70% COVERAGE, EVENLY DISPERSED CLOSED COAT - COMPLETE AND UNIFORM COVERAGE TABLE I UNCOATED PAPER COATED PAPER AVERAGE BREAKING STRENGTH BACKING BACKING WEIGHT MACHINE DIRECTION CROSS DIRECTION WEIGHT (LBS /2880 SQUARE FT) (LBS PER SQUARE INCH, MINIMUM) A 40-48 LBS 25 12 C 60-80 LBS 45 25 D 90 LBS 55 32 E 130 LBS 90 45 F 165 LBS 120 60 WORKMANSHIP. THE ABRASIVE GRAIN SHALL BE EVENLY DISPERSED AND POSITIVELY BONDED THROUGHOUT THE COATED DISK. THE DISK SHALL BE DESIGNED TO PRECLUDE DISINTEGRATION OF THE BACKING AND DIS-LODGING OF THE GRAIN MATERIAL DURING NORMAL USAGE. SHALL MEET THE REQUIREMENTS AS SPECIFIED IN ANSI B7.7. PRODUCT CONFORMANCE. THE PRODUCTS PROVIDED SHALL MEET THE SALIENT CHARACTERISTICS OF THIS DESCRIPTION, CONFORM TO THE PRODUCER' S OWN DRAWINGS, STANDARDS, AND QUALITY ASSURANCE PRACTICES AND BE THE SAME PRODUCT OFFERED FOR SALE IN THE COMMERCIAL MARKET. THE GOVERNMENT RESERVES THE RIGHT TO REQUIRE PROOF OF SUCH CONFORMANCE. MARKING: SHIPMENTS TO GSA AND OTHER CIVILIAN AGENCIES SHALL BE MARKED IN ACCORDANCE WITH FED-STD-123. SHIPMENTS TO THE DEPARTMENT OF DEFENSE (DOD) SHALL BE MARKED IN ACCORDANCE WITH MIL-STD-129. DATA SUBMISSION: THE MATERIAL SAFETY DATA SHEET (MSDS) SHALL BE SUBMITTED IN ACCORDANCE WITH THE LATEST REVISION OF FEDERAL STANDARD NO. 313. FOR SHIPMENTS TO GSA DISTRIBUTION CENTERS OR CUSTOMER SUPPLY CENTERS, THE CONTRACTOR SHALL PROVIDE ONE COPY OF THE MSDS INSIDE OR AFFIXED TO THE OUTSIDE OF EACH TRANSPORT PACKAGE AS DEFINED IN FED-STD-123. IF AFFIXED OUTSIDE, THE MSDS MUST BE PLACED IN A WEATHER-RESISTANT ENVELOPE. PREPARATION FOR DELIVERY: THE ITEM(S) SHALL BE PACKAGED AND PACKED TO