CUP, DRINKING (MUG) COFFEE MUG 10 OZ. WHITE W/AIR FORCE LOGO AWARD MADE IAW RFQ# 7350-01-438-7361 DATED 01/…

Public award description

CUP, DRINKING (MUG) COFFEE MUG 10 OZ. WHITE W/AIR FORCE LOGO AWARD MADE IAW RFQ# 7350-01-438-7361 DATED 01/13/2011 INCORPORATED AND MADE PART OF THIS AWARD L5 CUP, DRINKING (MUG): SHALL HAVE THE FOLLOWING CHARACTERISTICS: COFFEE MUG DESIGN - ESSENTIALLY STRAIGHT-SIDED COFFEE MUG; TWO-FINGER HANDLE WITH MINIMUM OPENING OF 1-1/2" BY 7/8" (AT WIDEST POINT). HEIGHT - 3-5/8" MINIMUM, TOP INSIDE DIAMETER - 2-5/8" MINIMUM WALL THICKNESS (AT LIP) - 3/16" MINIMUM, CAPACITY - 8 FLUID OUNCES MINIMUM, COLOR - WHITE, WITH US AIR FORCE INSIGNIA UNIT OF ISSUE BX (BOX OF 4 CUPS) MUG SHALL BE SUITABLE FOR USAGE WITHIN MICROWAVE OVENS AND SHALL POSSES SOME INSULATIVE QUALITIES. MUG SHALL BE SUITABLE FOR CLEANING WITHIN COMMERCIAL DISHWASHERS. MATERIAL CERAMIC-POLYMER WITH FOLLOWING CHARACTERISTICS: TENSILE STRENGTH@YIELD 8000 PSI MINIMUM (ASTM D638) IZOD NOTCHED IMPACT STRENGTH 0.5 FT-LB/IN @73 F (ASTM D256) MELTING POINT 430 F (ASTM D3418) THE MATERIAL SHALL CONTAIN NO LEAD OR CADMIUM. THE MATERIAL SHALL BE RECYCLABLE BY MANUFACTURER. MUG SHALL BE MADE FROM 100% RECYCLED MATERIAL. THE MUG SHALL MEET THE FOLLOWING PERFORMANCE REQUIREMENT: IMPACT STRENGTH AND CHIPPING RESISTANCE. THE MUG SHALL HAVE A MINIMUM RIM IMPACT STRENGTH OF 0.50 FT-LB WHEN TESTED IN ACCORDANCE WITH ASTM C368. PRODUCT CONFORMANCE: THE PRODUCTS PROVIDED SHALL MEET THE SALIENT CHARACTERISTICS OF THIS ITEM PURCHASE DESCRIPTION, CONFORM TO THE PRODUCER' S OWN DRAWINGS, SPECIFICATIONS, STANDARDS, AND QUALITY ASSURANCE PRACTICES, AND BE THE SAME PRODUCT OFFERED FOR SALE IN THE COMMERCIAL MARKET. THE GOVERNMENT RESERVES THE RIGHT TO REQUIRE PROOF OF SUCH CONFORMANCE. MARKING: SHIPMENTS TO GSA AND OTHER CIVILIAN AGENCIES SHALL BE MARKED IN ACCORDANCE WITH FED-STD-123. SHIPMENTS TO THE DEPARTMENT OF DEFENSE (DOD) SHALL BE MARKED IN ACCORDANCE WITH MIL-STD-129. PREPARATION FOR DELIVERY: THE ITEM(S) SHALL BE PACKAGED AND PACKED TO AFFORD ADEQUATE PROTECTION AGAINST PHYSICAL DAMAGE DURING SHIPMENT FROM THE SUPPLIER TO THE FIRST RECEIVING ACTIVITY. THE PACK SHALL COMPLY WITH THE RULES AND REGULATIONS APPLICABLE TO THE MODE OF TRANSPORTATION. THE PACKAGE SHALL BE THE SAME AS THAT NORMALLY PROVIDED BY THE SUPPLIER. IN THE EVENT A PALLET OR SKID IS USED FOR SHIPPING, THE FOLLOWING NOTICE SHALL APPLY: NOTICE OF SPECIAL REQUIREMENTS FOR SHIPMENT TO ALL COUNTRIES THAT HAVE ENDORSED THE IPPC GUIDELINES FOR TREATMENT OF NON-MANUFACTURED WOOD PACKAGING: THE INTERNATIONAL PLANT PROTECTION CONVENTION (IPPC) HAS APPROVED AND PUBLISHED ON MARCH 15, 2002, GUIDELINES FOR REGULATING WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE . COUNTRIES ENDORSING THE IPPC GUIDELINES ARE FOUND AT HTTP://WWW.APHIS.USDA.GOV/PPQ/SWP/. ADDITIONALLY, SHIPMENTS DELIVERED TO DOD DISTRIBUTION FACILITIES OR FREIGHT CONSOLIDATION POINTS FOR EVENTUAL DELIVERY TO OR THROUGH EU/IPPC COUNTRIES SHALL COMPLY WITH APPLICABLE DLA REGULATIONS AND PROCUREMENT LETTER PROCLTR 02-17.