DISK,ABRASIVE AWARD MADE IAW GSA ADVANTAGE GS-06F-0032K P/N M34659 DATED 03/10/2011 INCORPORATED AND MADE P…

Public award description

DISK,ABRASIVE AWARD MADE IAW GSA ADVANTAGE GS-06F-0032K P/N M34659 DATED 03/10/2011 INCORPORATED AND MADE PART OF THIS AWARD-L5 DISK, ABRASIVE: SHALL CONFORM WITH THE LISTED SALIENT CHARACTERISTICS AND MANUFACTURED IN ACCORDANCE WITH THE FOLLOWING ANSI AND ASTM INDUSTRY SPECIFICATIONS: TYPE - ALUMINUM OXIDE/CUBITRON GRIT - 80 BACKING - " YN" POLYESTER CLOTH COATING - CLOSED COAT GRADE - NON-WATERPROOF STYLE - PLAIN FLAT, NO ARBOR HOLE & SHALL BE FUNCTIONALLY COMPATIBLE WITH 3M ROLOC, TURN-ON STYLE, QUICK CHANGE MECHANICAL LOCKING DEVICE, BACK-UP PADS BOND - RESIN SIZE - 2 INCH DIAMETER USAGE DESIGNATION - METAL OR WOODWORKING UNIT OF ISSUE - BX (50 DISKS PER BOX) ANSI B7.7 - SAFETY REGULATIONS FOR ABRADING MATERIALS WITH COATED ABRASIVE SYSTEMS ANSI B74.18 - SPECIFICATIONS FOR GRADING OF CERTAIN ABRASIVE ON COATED ABRASIVE PRODUCTS APPLICATION FOR COPIES OF ANSI STANDARDS SHOULD BE ADDRESSED TO THE AMERICAN NATIONAL STANDARDS INSTITUTE, 1430 BROADWAY, NEW YORK, NY 10018. ASTM D 5035 - STANDARD TEST METHODS FOR BREAKING FORCE AND ELONGATION OF TEXTILE PRODUCTS (STRIP FORCE) ASTM E 29 - STANDARD PRACTICE FOR USING DIGITS IN TEST DATA TO DETERMINE CONFORMANCE WITH SPECIFICATIONS APPLICATION FOR COPIES OF ASTM STANDARDS SHOULD BE ADDRESSED TO ASTM, 100 BARR HARBOR DRIVE, WEST CONSHOHOCKEN, PA 19428-2959. THE DOCUMENTS/SPECIFICATIONS REFERENCED IN THIS PURCHASE DESCRIPTION SHALL BE THE ISSUES IN EFFECT ON THE DATE OF ISSUANCE OF THE INVITATION FOR BIDS OR REQUEST FOR PROPOSALS. IN THE EVENT OF A CONFLICT BETWEEN THIS PURCHASE DESCRIPTION AND A DOCUMENT REFERENCED HEREIN, THIS PURCHASE DESCRIPTION SHALL TAKE PRECEDENCE. ABRASIVE GRAIN. THE ABRASIVE GRAIN SHALL BE CRUSHED AND GRADED IN ACCORDANCE WITH ANSI B74.18. SHALL BE EVENLY DISPERSED AND COMPLETELY COVER THE SURFACE OF THE BACKING. ADHESIVE. ANY GOOD QUALITY ADHESIVE IS ACCEPTABLE PROVIDING THAT DISLODGING OF ABRASIVE GRAIN IS MINIMIZED. ABRASIVE COVERAGE. OPEN COAT - 50 TO 70% COVERAGE, EVENLY DISPERSED CLOSED COAT - COMPLETE AND UNIFORM COVERAGE CLOTH BACKING MATERIAL: THE TREATED CLOTH BACKING MATERIAL SHALL BE IN ACCORDANCE WITH TABLE 1 AND TESTED IN ACCORDANCE WITH ASTM D 5035. WHEN WATERPROOF MATERIAL IS SPECIFIED, THE BACKING MATERIAL SHALL BE TREATED TO MAKE IT IMPERVIOUS TO WATER. TABLE I COATED CLOTH BACKING AVERAGE BREAKING STRENGTH TYPE BACKING WEIGHT WARP DIRECTION FILLING DIRECTION (LBS PER SQUARE INCH MINIMUM) JEANS CLOTH J WEIGHT 80 LBS/IN 35 LBS/IN DRILLS CLOTH X WEIGHT 130 LBS/IN 50 LBS/IN HEAVY DRILLS CLOTH Y WEIGHT 160 LBS/IN 65 LBS/IN PRODUCT CONFORMANCE: THE PRODUCTS PROVIDED SHALL MEET THE SALIENT CHARACTERISTICS OF THIS ITEM PURCHASE DESCRIPTION, CONFORM TO THE PRODUCER' S OWN DRAWINGS, SPECIFICATIONS, STANDARDS, AND QUALITY ASSURANCE PRACTICES, AND BE THE SAME PRODUCT OFFERED FOR SALE IN THE COMMERCIAL MARKET. THE GOVERNMENT RESERVES THE RIGHT TO REQUIRE PROOF OF SUCH CONFORMANCE. MARKING: SHIPMENTS TO GSA AND OTHER CIVILIAN AGENCIES SHALL BE MARKED IN ACCORDANCE WITH FED-STD-123. SHIPMENTS TO THE DEPARTMENT OF DEFENSE (DOD) SHALL BE MARKED IN ACCORDANCE WITH MIL-STD-129. DATA SUBMISSION: THE MATERIAL SAFETY DATA SHEET (MSDS) SHALL BE SUBMITTED IN ACCORDANCE WITH THE LATEST REVISION OF FEDERAL STANDARD NO. 313. FOR SHIPMENTS TO GSA DISTRIBUTION CENTERS OR CUSTOMER SUPPLY CENTERS, THE CONTRACTOR SHALL PROVIDE ONE COPY OF THE MSDS INSIDE OR AFFIXED TO THE OUTSIDE OF EACH TRANSPORT PACKAGE AS DEFINED IN FED-STD-123. IF AFFIXED OUTSIDE, THE MSDS MUST BE PLACED IN A WEATHER-RESISTANT ENVELOPE. PREPARATION FOR DELIVERY: THE ITEM(S) SHALL BE PACKAGED AND PACKED TO AFFORD ADEQUATE PROTECTION AGAINST PHYSICAL DAMAGE DURING SHIPMENT FROM THE SUPPLIER TO THE FIRST RECEIVING ACTIVITY. THE PACK SHALL COMPLY WITH THE RULES AND REGULATIONS APPLICABLE TO THE MODE OF TRANSPORTATION. THE PACKAGE SHALL BE THE SAME AS THAT NORMALLY PROVIDED BY THE SUPPLIER. IN THE EVENT A PALLET OR SKID IS USED FOR SHIPPING, THE FOLL