COMMERICAL AIR CONDITIONERS MIPR #F3QCDK3238G001 FE639132210209_F3QCDK3238G001_NORTH KINGSTOWN RI BPA GS-07…

Public award description

COMMERICAL AIR CONDITIONERS MIPR #F3QCDK3238G001 FE639132210209_F3QCDK3238G001_NORTH KINGSTOWN RI BPA GS-07F-Y0099. FH R/F 4111 COMMERICAL FLIGHTLINE AIR CONDITIONERS MIPR #F3QCDK3238G001 ORDER ISSUED IN ACCORDANCE WITH TUG TECHNOLOGY CORPORATION BPA NO., GS-07F-Y0099, AWARED ON AUGUST 7, 2012 (AGAINST MAS CONTRACT GS-07F-0507N) FOR EBUY RFQ NO. 673189. CONTRACTOR WILL PROVIDE ONE (1) GROUP CONSISTING OF THE FOLLOWING: DESCRIPTION: DIESEL-POWERED, TRAILER-MOUNTED, COMMERICAL, FLIGHT-LINE AIR CONDITIONER. CONSISTING OF THE FOLLOWING FOUR (4) GSA SCHEDULE PART NUMBERS: ITEM NO. 1 1.AC25D, 25 TON DIESEL AIRCRAFT AIR CONDITIONER 2.OPT-AIR-024, TWO (2) ADDITIONAL 20-FOOT DISCHARGE HOSES 3.OPT-PAI-047, ZINC RICH PRIMER FOR CORROSION PROTECTION 4.OPT-FIL-038, MERV 13 FILTRATION (FILTER) ASSEMBLY QUANTITY REQUESTED: 1 EA UNIT PRICE: $68,578.75 EXT. PRICE: $68,578.75 ITEM NO. 2 DESCRIPTION: F.O.B. DOOR-TO-DOOR DESTINATION TRANSPORTATION FROM TUG TECHNOLOGIES MANUFACTURING FACILITY IN KENNESAW, GA TO TOPEKA, KS. QUANTITIY REQUESTED: 1EA UNIT PRICE: $997.00** EXT. PRICE: $997.00** ** DENOTES OPEN MARKET ITEM GRAND TOTAL OF ORDER: $69,575.75 SHIPPING AND HANDLING TERMS ARE F.O.B. DOOR-TO-DOOR DESTINATION. INSEPECTION AND ACCEPATANCE SHALL BE AT DESTINATION LISTED BELOW. DODAAC: FE6152 FE6152 190 ARW LGTT BLDG 662 CML PHN 785-861-4298 5920 SE COYOTE DR TOPEKA, KS 66619-5370 ALL DELIVERIS SHALL INCLUDE A DD 250 FROM. THE DD 250 SHALL BE ACCOMPANIED BY A CERTIFICATE OF CONFORMANCE IN ACCORDANCE WITH FAR 52.246-15. THE DD 250 FORM SHALL BE SIGNED BY JIM BUTLER, COTR, OR AN ALTERNATE POC WIHICH WILL BE DESIGNATED BY THE COTR. TUG TECHNOLOGIES SHALL NOT INVOICE GSA FOR PAYMENT UNTIL THE DD 250 FROM IS APPROVED BY THE COTR AND CONTRACTING OFFICER. ADMINISTRATION OF THIS ORDER IS RETAINED. CONTACT DANIEL HERRERA VIA EMAIL AT DANIEL.HERRERA@GSA.GOV OR BY PHONE AT 817-850-8256 FOR FURTHER ASSISTANCE. ALL PACKAGES AND SHIPMENTS MUST ALSO COMPLY WITH THE FOLLOWING REQUIREMENTS: MARKING: SHIPMENTS TO THE DEPARTMENT OF DEFENSE (DOD) SHALL BE MARKED IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING: IN ADDITION TO MARKINGS REQUIRED BY MIL-STD-129, SHIPMENTS SHALL BE MARKED WITH THE REQUISITION NUMBER; SUPPAD AND ITEM NAME (WILL BE SHOWN ON INDIVIDUAL ORDERS). PREPARATION FOR DELIVERY: THE ITEM(S) SHALL BE PACKAGED AND PACKED TO AFFORD ADEQUATE PROTECTION AGAINST PHYSICAL DAMAGE DURING SHIPMENT FROM THE SUPPLIER TO THE FIRST RECEIVING ACTIVITY. THE PACK SHALL COMPLY WITH THE RULES AND REGULATIONS APPLICABLE TO THE MODE OF TRANSPORTATION. THE PACKAGE SHALL BE THE SAME AS THAT NORMALLY PROVIDED BY THE SUPPLIER. IN THE EVENT A PALLET OR SKID IS USED FOR SHIPPING, THE FOLLOWING NOTICE SHALL APPLY: NOTICE OF SPECIAL REQUIREMENTS FOR SHIPMENT TO ALL COUNTRIES THAT HAVE ENDORSED THE IPPC GUIDELINES FOR TREATMENT ON NON-MANUFACTURED WOOD PACKAGING: THE INTERNATIONAL PLANT PROTECTION CONVENTION (IPPC) HAS APPROVED AND PUBLISHED ON MARCH 15, 2002, GUIDELINES FOR REGULATING WOOD PACKAGING MATERIAL IN ARE FOUND AT HTTP://WWW.APHIS.USDA.GOV/PPQ/SWP/. CLAUSE D-FSS-468 REQUIRES NON-MANUFACTURED WOOD PALLETS AND OTHER NON-MANUFACTURED WOOD PACKAGING MATERIAL USED IN SHIPMENTS DESTINED TO IPPC COMPLIANT COUNTRIES REQUIRE THE APPROPRIATE WOOD TREATMENT. ADDITIONALLY, SHIPMENTS DELIVERED TO DOD DISTRIBUTION FACILITIES OR FREIGHT CONSOLIDATION POINTS FOR EVENTUAL DELIVERY TO OR THROUGH EU/IPPC COUNTRIES SHALL COMPLY WITH APPLICABLE DLA REGULATIONS AND PROCUREMENT LETTER PROCLTR 02-17.