CLEANER,VACUUM,ELECTRIC. SHALL BE SHOP-VAC ULTR A PRO P/N: 379638 (CATALOG NO. 962-12-00) OR EQU AL. ***IAW…

Public award description

CLEANER,VACUUM,ELECTRIC. SHALL BE SHOP-VAC ULTR A PRO P/N: 379638 (CATALOG NO. 962-12-00) OR EQU AL. ***IAW P/N 379638 AND GSA ADVANTAGE PRICE FOLLOWING THE IPD, INCORPORATED AND MADE PART OF THIS ORDER L7 ***CLEANER, VACUUM, ELECTRIC: SHALL BE SHOP-VAC ULTRA PRO P/N 379638 (CATALOG NO. 962-12-00), OR EQUAL, WITH THE FOLLOWING CHARACTERISTICS: SHALL BE A 12-GALLON CAPACITY WET/DRY VACUUM; 5 PEAK HP MOTOR; ANTI-TIP DESIGN; MOTOR HOUSING DESIGNED FOR REDUCED NOISE; THREE-PIECE FILTRATION ASSEMBLY WITH FOAM SLEEVE, CARTRIDGE FILTER, AND DISPOSABLE FILTER BAG; DURABLE PLASTIC TANK WITH NON-CLOGGING DRAIN PLUG; BLOWER PORT AND VACUUM PORT WITH FITTINGS DESIGNED TO PREVENT HOSE FROM DISENGAGING DURING USE; AUTOMATIC FLOAT SHUTOFF TO PREVENT LIQUID OVERFLOW; TOP AND SIDE CARRYING HANDLES; DUAL-WHEELED HOODED CASTERS; ATTACHED ACCESSORY BASKET FOR HOLDING TOOLS; CORD WRAP AND HOSE HOLDER; 190 CFM OF AIR FLOW; 59 INCH WATERLIFT; ELECTRICAL RATINGS OF 120 VOLT, 60 HZ, 11 AMPS; 340 PEAK AIR WATTS; 18 FOOT POWER CORD; INCLUDES THE FOLLOWING TOOLS: 2-1/5 INCH DIAMETER 8 FOOT LONG FLEXIBLE HOSE, 2 EXTENSION WANDS, 14 INCH FLOOR NOZZLE WITH BRUSH, 8 INCH UTILITY NOZZLE, CREVICE TOOL, CONCENTRATOR NOZZLE, AND ERGONOMIC ELBOW GRIP. IMAGE IS REPRESENTATIONAL AND INTENDED AS A GUIDE ONLY. UNIT OF ISSUE SHALL BE EA (ONE COMPLETE SYSTEM IN A PACKAGE). PRODUCT CONFORMANCE: THE PRODUCTS PROVIDED SHALL MEET THE SALIENT CHARACTERISTICS OF THIS PURCHASE DESCRIPTION, CONFORM TO THE PRODUCER S OWN DRAWINGS, SPECIFICATIONS, STANDARDS, AND QUALITY ASSURANCE PRACTICES AND BE THE SAME PRODUCT OFFERED FOR SALE IN THE COMMERCIAL MARKET. THE GOVERNMENT RESERVES THE RIGHT TO REQUIRE PROOF OF SUCH CONFORMANCE. MARKING: SHIPMENTS TO GSA AND OTHER CIVILIAN AGENCIES SHALL BE MARKED IN ACCORDANCE WITH FED-STD-123. SHIPMENTS TO THE DEPARTMENT OF DEFENSE (DOD) SHALL BE MARKED IN ACCORDANCE WITH MIL-STD-129. PREPARATION FOR DELIVERY: THE ITEM(S) SHALL BE PACKAGED AND PACKED TO AFFORD ADEQUATE PROTECTION AGAINST PHYSICAL DAMAGE DURING SHIPMENT FROM THE SUPPLIER TO THE FIRST RECEIVING ACTIVITY. THE PACK SHALL COMPLY WITH THE RULES AND REGULATIONS APPLICABLE TO THE MODE OF TRANSPORTATION. THE PACKAGE SHALL BE THE SAME AS THAT NORMALLY PROVIDED BY THE SUPPLIER. IN THE EVENT A PALLET OR SKID IS USED FOR SHIPPING, THE FOLLOWING NOTICE SHALL APPLY: NOTICE OF SPECIAL REQUIREMENTS FOR SHIPMENT TO ALL COUNTRIES THAT HAVE ENDORSED THE IPPC GUIDELINES FOR TREATMENT OF NON-MANUFACTURED WOOD PACKAGING: THE INTERNATIONAL PLANT PROTECTION CONVENTION (IPPC) HAS APPROVED AND PUBLISHED ON MARCH 15, 2002, GUIDELINES FORREGULATING WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE . COUNTRIES ENDORSING THE IPPC GUIDELINES ARE FOUND AT HTTP://WWW.APHIS.USDA.GOV/PPQ/SWP/. CLAUSE D-FSS-468 REQUIRES NON-MANUFACTURED WOOD PALLETS AND OTHER NON-MANUFACTURED WOOD PACKAGING MATERIAL USED IN SHIPMENTS DESTINED TO IPPC COMPLIANT COUNTRIES REQUIRE THE APPROPRIATE WOOD TREATMENT. ADDITIONALLY, SHIPMENTS DELIVERED TO DOD DISTRIBUTION FACILITIES OR FREIGHT CONSOLIDATION POINTS FOR EVENTUAL DELIVERY TO OR THROUGH EU/IPPC COUNTRIES SHALL COMPLY WITH APPLICABLE DLA REGULATIONS AND PROCUREMENT LETTER PROCLTR 02-17. UNITIZATION OF PALLET LOAD: THE PALLETIZED LOAD SHALL BE UNITIZED AND SECURED TO THE PALLET TO INSURE THAT THE LOAD ARRIVES INTACT.