WHEEL,FLAP,ABRASIVE ***********AWARDED IAW P/N J19018 AND GSA ADVANTAGE**************** PRICE FOLLOWINGTHE…

Public award description

WHEEL,FLAP,ABRASIVE ***********AWARDED IAW P/N J19018 AND GSA ADVANTAGE**************** PRICE FOLLOWINGTHE IPD, INCORPORATED AND MADE PART OF THIS ORDER L7 ******************************************************* WHEEL, FLAP, ABRASIVE: SHALL BE A MULTI-STACKED, ABRASIVE FLAP WHEEL (SEE FIGURE I). SHALL CONFORM WITH THE LISTED SALIENT CHARACTERISTICS AND MANUFACTURED IN ACCORDANCE WITH THE FOLLOWING ANSI AND ASTM INDUSTRY SPECIFICATIONS AND REQUIREMENTS: FIGURE I ABRASIVE - ZIRCONIA-ALUMINUM OXIDE GRIT - 60 WHEEL STYLE - DEPRESSED CENTER W/ANGLED DESIGN, SHALL BE PHYSICALLY & FUNCTIONALLY COMPARABLE TO THE MERIT POWERFLEX FLAP DISKS BACKING - X WEIGHT CLOTH COATING - CLOSED COAT GRADE - NONWATERPROOF BOND - RESIN ARBOR HOLE - 7/8 INCH SIZE - 7 INCH DIAMETER SPEED - 8600 MAXIMUM USAGE DESIGNATION - METAL WORKING UNIT OF ISSUE - BX (10 DISKS PER BOX) ANSI B7.7 - SAFETY REGULATIONS FOR ABRADING MATERIALS WITH COATED ABRASIVE SYSTEMS ANSI B74.18 - SPECIFICATIONS FOR GRADING OF CERTAIN ABRASIVE ON COATED ABRASIVE PRODUCTS APPLICATION FOR COPIES OF ANSI STANDARDS SHOULD BE ADDRESSED TO THEAMERICAN NATIONAL STANDARDS INSTITUTE, 1430 BROADWAY, NEW YORK, NY 10018. ASTM D 5035 - STANDARD TEST METHODS FOR BREAKING FORCE AND ELONGATION OF TEXTILE PRODUCTS (STRIP FORCE) ASTM E 29 - STANDARD PRACTICE FOR USING DIGITS IN TEST DATA TO DETERMINE CONFORMANCE WITH SPECIFICATIONS APPLICATION FOR COPIES OF ASTM STANDARDS SHOULD BE ADDRESSED TO ASTM, 100 BARR HARBOR DRIVE, WEST CONSHOHOCKEN, PA 19428-2959. THE DOCUMENTS REFERENCED IN THIS PURCHASE DESCRIPTION SHALL BE THE ISSUES IN EFFECT ON THE DATE OF ISSUANCE OF THE INVITATION FOR BIDS OR REQUEST FOR PROPOSALS. IN THE EVENT OF A CONFLICT BETWEEN THIS PURCHASE DESCRIPTION AND A DOCUMENT REFERENCED HEREIN, THIS PURCHASE DESCRIPTION SHALL TAKE PRECEDENCE. ABRASIVE GRAIN: THE ABRASIVE GRAIN SHALL BE CRUSHED AND GRADED IN ACCORDANCE WITH ANSI B74.18. SHALL BE EVENLY DISPERSED AND COMPLETELY COVER THE SURFACE OF THE BACKING. ADHESIVE: ANY GOOD QUALITY ADHESIVE IS ACCEPTABLE PROVIDING THAT DISLODGING OF ABRASIVE GRAIN IS MINIMIZED. ABRASIVE COVERAGE: OPEN COAT - 50 TO 70% COVERAGE, EVENLY DISPERSED CLOSED COAT - COMPLETE AND UNIFORM COVERAGE CLOTH BACKING MATERIAL: THE TREATED CLOTH BACKING MATERIAL SHALL BE IN ACCORDANCE WITH TABLE 1 AND TESTED IN ACCORDANCE WITH ASTM D 5035. WHEN WATERPROOF MATERIAL IS SPECIFIED, THE BACKING MATERIAL SHALL BE TREATED TO MAKE IT IMPERVIOUS TO WATER. TABLE I COATED CLOTH BACKING AVERAGE BREAKING STRENGTH TYPE BACKING WEIGHT WARP DIRECTION FILLING DIRECTION (LBS PER SQUARE INCH MINIMUM) JEANS CLOTH J WEIGHT 80 LBS/IN 35 LBS/IN DRILLS CLOTH X WEIGHT 130 LBS/IN 50 LBS/IN HEAVY DRILLS CLOTH Y WEIGHT 160 LBS/IN 65 LBS/IN NOTE: TOLERANCE PLUS OR MINUS 15% WORKMANSHIP. THE GRAIN SHALL BE EVENLY DISPERSED THROUGHOUT THE OPEN OR CLOSED COATED TYPE WHEEL AS SPECIFIED. THE WHEEL SHALL BE DESIGNED TO PRECLUDE DISINTEGRATION OF THE BACKING MATERIAL AND INSURE POSITIVE BONDING TO PREVENT DISLODGING OF THE GRAIN MATERIAL FROM THE BACKING DURING NORMAL USE UNDER THE GUIDELINES DESCRIBED IN ANSI B7.7. PRODUCT CONFORMANCE. THE PRODUCTS PROVIDED SHALL MEET THE SALIENT CHARACTERISTICS OF THIS DESCRIPTION, CONFORM TO THE PRODUCER' S OWN DRAWINGS, STANDARDS, AND QUALITY ASSURANCE PRACTICES AND BE THE SAME PRODUCT OFFERED FOR SALE IN THE COMMERCIAL MARKET. THE GOVERNMENT RESERVES THE RIGHT TO REQUIRE PROOF OF SUCH CONFORMANCE. MARKING: SHIPMENTS TO GSA AND OTHER CIVILIAN AGENCIES SHALL BE MARKED IN ACCORDANCE WITH FED-STD-123. SHIPMENTS TO THE DEPARTMENT OF DEFENSE (DOD) SHALL BE MARKED IN ACCORDANCE WITH MIL-STD-129. DATA SUBMISSION: THE MATERIAL SAFETY DATA SHEET (MSDS) SHALL BE SUBMITTED IN ACCORDANCE WITH THE LATEST REVISION OF FEDERAL STANDARD NO. 313. FOR SHIPMENTS TO GSA DISTRIBUTION CENTERS OR CUSTOMER SUPPLY CENTERS, THE CONTRACTOR SHALL PROVIDE ONE COPY OF THE MSDS INSIDE OR AFFIXED TO THE OUTSIDE OF EACH TRANSPORT PACKAGE (AS DEFINED IN