SIGN AWARDED IAW P/N 373-00221 AND GSA ADVANTAGE PRICE FOLLOWING THE IPD, INCORPORATED AND MADE PART OFTHIS…

Public award description

SIGN AWARDED IAW P/N 373-00221 AND GSA ADVANTAGE PRICE FOLLOWING THE IPD, INCORPORATED AND MADE PART OFTHIS ORDER L7 SIGN, TRAFFIC: NO PARKING ANY TIME. SHALL BE IN ACCORDANCE WITH U.S. DEPARTMENT OF TRANSPORTATION MANUAL ON UNIFORM TRAFFIC CONTROL DEVICES FOR STREETS AND HIGWAYS, 2003 EDITION, INCLUDING REVISION 1 DATED NOVEMBER 2004 AND REVISION 2 DATED DECEMBER 2007, ATTACHED DRAWING NO. R7-1, EXCEPT WITHOUT ARROW (SEE REPRESENTATIVE SAMPLE AT FIGURE 1). DIMENSIONS: 12 INCHES X 18 INCHES; LEGEND IN ACCORDANCE WITH U.S. DEPARTMENT OF TRANSPORTATION STANDARD ALPHABETS FOR HIGHWAY SIGNS 2004 EDITION. MATERIALS: ALUMINUM PANELS (0.063 INCH THICK) SHALL CONFORM TO ASTM B-209, ALLOY 6061-T6 OR 5052-H38 WITH CHROMATE CONVERSION COATING IN ACCORDANCE WITH ASTM-B-449 CLASS 2. ALUMINUM SIGNS SHALL CONTAIN 25 PERCENT MINIMUM POST CONSUMER CONTENT AND 25 PERCENT MINIMUM RECOVERED MATERIALS BY WEIGHT AS SPECIFIED BY THE EPA GUIDELINES FOR FEDERAL PROCUREMENT. REFLECTIVE SHEETING SHALL CONFORM TO COLOR SPECIFICATIONS FOR RETROREFLECTIVE SIGN AND PAVEMENT MARKING MATERIALS FOUND IN APPENDIX TO SUBPART F OF PART 655 OF TITLE 23 OF THE CODE OF FEDERAL REGULATIONS. LEGEND SHALL BE APPLIED IN ACCORDANCE WITH APPLICABLE METHOD OF FP-96. WORKMANSHIP REQUIREMENTS, TRAFFIC SIGNS: INSCRIPTION - THE INSCRIPTION SHALL BE CENTERED ON THE SIGN SURFACE WITHIN 1/4 INCH. THE INSCRIPTION CHARACTERS SHALL BE WELL DEFINED, FULLY FORMED, AND UNIFORM IN APPEARANCE. SIGN BACKING - THE ALUMINUM BACKING SHALL BE OF THE DIMENSIONS SPECIFIED ON THE DRAWING WITHIN + OR - 1/8 INCH FOR ALL STATED DIMENSIONS OF 24 INCHES AND OVER, WITH + OR - 1/16 INCH FOR ALL STATED DIMENSIONS LESS THAN 24 INCHES. SURFACES AND EDGES SHALL BE CLEAN, SMOOTH, AND FREE FROM BURRS, ROUGHNESS, SHARP EDGES, CRACKS, PITS, AND GOUGES. THE ALUMINUM PANEL SHALL BE COMPLETELY TREATED WITH THE SPECIFIED CORROSION RESISTING COATING. SURFACE - THE SURFACE OF THE SIGN FACE SHALL BE COMPLETELY COVERED (NO PORTION OF THE ALUMINUM BACKING VISIBLE) THERE SHALL BE NO FOREIGN MATTER UNDER THE SHEETING OR IMBEDDED IN THE INSCRIPTION CHARACTERS. THERE SHALL BE NO AIR POCKETS, BUBBLES, OR BLISTERS IN THE SHEETING MATERIAL AND ALL EDGES SHALL BE COMPLETELY BONDED TO THE ALUMINUM PANEL. THERE SHALL BE NO SCRATCHES, SMUDGES, PINHOLES, SCORES, WRINKLES OR OTHER DEFECTS AFFECTING APPEARANCE WHICH CAN BE VISUALLY DETECTED WHEN THE SIGN IS VIEWED FROM A DISTANCE OF FIVE (5) FEET. FIGURE 1: REPRESENTATIVE SAMPLE. UNIT OF ISSUE - EA (EACH) PRODUCT CONFORMANCE: THE PRODUCTS PROVIDED SHALL MEET THE SALIENT CHARACTERISTICS OF THIS ITEM PURCHASE DESCRIPTION, CONFORM TO THE PRODUCER' S OWN DRAWINGS, SPECIFICATIONS, STANDARDS, AND QUALITY ASSURANCE PRACTICES, AND BE THE SAME PRODUCT OFFERED FOR SALE IN THE COMMERCIAL MARKET. THE GOVERNMENT RESERVES THE RIGHT TO REQUIRE PROOF OF SUCH CONFORMANCE. PREPARATION FOR DELIVERY: THE ITEM(S) SHALL BE PACKAGED AND PACKED TO AFFORD ADEQUATE PROTECTION AGAINST PHYSICAL DAMAGE DURING SHIPMENT FROM THE SUPPLIER TO THE FIRST RECEIVING ACTIVITY. THE PACK SHALL COMPLY WITH THE RULES AND REGULATIONS APPLICABLE TO THE MODE OF TRANSPORTATION. THE PACKAGE SHALL BE THE SAME AS THAT NORMALLY PROVIDED BY THE SUPPLIER. IN THE EVENT A PALLET OR SKID IS USED FOR SHIPPING, THE FOLLOWING NOTICE SHALL APPLY: NOTICE OF SPECIAL REQUIREMENTS FOR SHIPMENT TO ALL COUNTRIES THAT HAVE ENDORSED THE IPPC GUIDELINES FOR TREATMENT OF NON-MANUFACTURED WOOD PACKAGING: THE INTERNATIONAL PLANT PROTECTION CONVENTION (IPPC) HAS APPROVED AND PUBLISHED ON MARCH 15, 2002, GUIDELINES FOR REGULATING WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE . COUNTRIES ENDORSING THE IPPC GUIDELINES ARE FOUND AT HTTP://WWW.APHIS.USDA.GOV/PPQ/SWP/. CLAUSE D-FSS-468 REQUIRES NON-MANUFACTURED WOOD PALLETS AND OTHER NON-MANUFACTURED WOOD PACKAGING MATERIAL USED IN SHIPMENTS DESTINED TO IPPC COMPLIANT COUNTRIES REQUIRE THE APPROPRIATE WOOD TREATMENT. ADDITIONALLY, SHIPMENTS DELIVERED TO DOD DISTRIBUTION FACILITI