WHEEL,ABRASIVE AWARDED IAW P/N 66252829856 AND GSA ADVANTAGE PRICE FOLLOWING THE IPD, INCORPORATED AND MADE…

Public award description

WHEEL,ABRASIVE AWARDED IAW P/N 66252829856 AND GSA ADVANTAGE PRICE FOLLOWING THE IPD, INCORPORATED AND MADE PART OF THIS ORDER L7 WHEEL, ABRASIVE: SHALL BE NORTON ABRASIVE, CHARGER P/N 662528-29856 OR EQUAL AND SHALL HAVE THE FOLLOWING CHARACTERISTICS: THIS IS A GENERAL PURPOSE ABRASIVE WHEEL USED IN GRINDING VARIOUS ALLOYS FROM IRON TO STAINLESS. THE WHEEL SHALL BE A DEPRESSED CENTER HUB STYLE, IN ACCORDANCE WITH ANSI B74.2, TYPE 27, TABLE 35. ABRASIVE - ALUMINUM OXIDE AND ZIRCONIA ALUMINUM BLEND BACKING - CLOTH THICKNESS - 1/4 INCH ARBOR HOLE - 0.875 INCH DIAMETER WHEEL DIAMETER - 4.500 INCHES GRINDING ANGLE - 10 TO 25 DEGREES SPEED RATING - 13,580 RPM (MAX) DESIGNED USE - METAL WORKING UNIT OF ISSUE - PG (20 WHEELS PER PACKAGE) ANSI B74.2 - SPECIFICATIONS FOR SHAPES AND SIZES OF GRINDING WHEELS, AND FOR SHAPES, SIZES AND IDENTIFICATION OF MOUNTED WHEELS APPLICATION FOR COPIES OF ANSI STANDARDS SHOULD BE ADDRESSED TO THE AMERICAN NATIONAL STANDARDS INSTITUTE, 1430 BROADWAY, NEW YORK, NY 10018. THE DOCUMENTS/SPECIFICATIONS REFERENCED IN THIS PURCHASE DESCRIPTION SHALL BE THE ISSUES IN EFFECT ON THE DATE OF ISSUANCE OF THE INVITATION FOR BIDS OR REQUEST FOR PROPOSALS. IN THE EVENT OF A CONFLICT BETWEEN THIS PURCHASE DESCRIPTION AND A DOCUMENT REFERENCED HEREIN, THIS PURCHASE DESCRIPTION SHALL TAKE PRECEDENCE. PRODUCT CONFORMANCE. THE PRODUCTS PROVIDED SHALL MEET THE SALIENT CHARACTERISTICS OF THIS DESCRIPTION, CONFORM TO THE PRODUCER' S OWN DRAWINGS, STANDARDS, AND QUALITY ASSURANCE PRACTICES AND BE THE SAME PRODUCT OFFERED FOR SALE IN THE COMMERCIAL MARKET. THE GOVERNMENT RESERVES THE RIGHT TO REQUIRE PROOF OF SUCH CONFORMANCE. MARKING: SHIPMENTS TO GSA AND OTHER CIVILIAN AGENCIES SHALL BE MARKED IN ACCORDANCE WITH FED-STD-123. SHIPMENTS TO THE DEPARTMENT OF DEFENSE (DOD) SHALL BE MARKED IN ACCORDANCE WITH MIL-STD-129. DATA SUBMISSION: THE MATERIAL SAFETY DATA SHEET (MSDS) SHALL BE SUBMITTED IN ACCORDANCE WITH THE LATEST REVISION OF FEDERAL STANDARD NO. 313. FOR SHIPMENTS TO GSA DISTRIBUTION CENTERS OR CUSTOMER SUPPLY CENTERS, THE CONTRACTOR SHALL PROVIDE ONE COPY OF THE MSDS INSIDE OR AFFIXED TO THE OUTSIDE OF EACH TRANSPORT PACKAGE (AS DEFINED IN PARAGRAPH 1 OF FED-STD-123), IF AFFIXED OUTSIDE, THE MSDS MUST BE PLACED IN A WEATHER-RESISTANT ENVELOPE. PREPARATION FOR DELIVERY: THE ITEM(S) SHALL BE PACKAGED AND PACKED TO AFFORD ADEQUATE PROTECTION AGAINST PHYSICAL DAMAGE DURING SHIPMENT FROM THE SUPPLIER TO THE FIRST RECEIVING ACTIVITY. THE PACK SHALL COMPLY WITH THE RULES AND REGULATIONS APPLICABLE TO THE MODE OF TRANSPORTATION. THE PACKAGE SHALL BE THE SAME AS THAT NORMALLY PROVIDED BY THE SUPPLIER. IN THE EVENT A PALLET OR SKID IS USED FOR SHIPPING, THE FOLLOWING NOTICE SHALL APPLY: NOTICE OF SPECIAL REQUIREMENTS FOR SHIPMENT TO ALL COUNTRIES THAT HAVE ENDORSED THE IPPC GUIDELINES FOR TREATMENT OF NON-MANUFACTURED WOOD PACKAGING: THE INTERNATIONAL PLANT PROTECTION CONVENTION (IPPC) HAS APPROVED AND PUBLISHED ON MARCH 15, 2002, GUIDELINES FOR REGULATING WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE . COUNTRIES ENDORSING THE IPPC GUIDELINES ARE FOUND AT HTTP://WWW.APHIS.USDA.GOV/PPQ/SWP/. CLAUSE D-FSS-468 REQUIRES NON-MANUFACTURED WOOD PALLETS AND OTHER NON-MANUFACTURED WOOD PACKAGING MATERIAL USED IN SHIPMENTS DESTINED TO IPPC COMPLIANT COUNTRIES REQUIRE THE APPROPRIATE WOOD TREATMENT. ADDITIONALLY, SHIPMENTS DELIVERED TO DOD DISTRIBUTION FACILITIES OR FREIGHT CONSOLIDATION POINTS FOR EVENTUAL DELIVERY TO OR THROUGH EU/IPPC COUNTRIES SHALL COMPLY WITH APPLICABLE DLA REGULATIONS AND PROCUREMENT LETTER PROCLTR 02-17.