CLOTH, ABRASIVE - 50 YD ROLL, 3 INCHES WIDE 280 GRIT. JEANS CLOTH BACKING. CLOSED COAT. NONWATERPROOF. ***U…

Public award description

CLOTH, ABRASIVE - 50 YD ROLL, 3 INCHES WIDE 280 GRIT. JEANS CLOTH BACKING. CLOSED COAT. NONWATERPROOF. ***URGENT AND COMPELLING** AWARDED IAW P/N R3X50AO280J AND GSA ADVANTAGE PRICE FOLLOWING THE IPD, INCORPORATED AND MADE PART OF THIS ORDER L7 CLOTH, ABRASIVE: SHALL CONFORM WITH THE LISTED SALIENT CHARACTERISTICS AND MANUFACTURED IN ACCORDANCE WITH THE FOLLOWING ANSI AND ASTM INDUSTRY SPECIFICATIONS: ABRASIVE - ALUMINUM OXIDE GRIT - 280 BACKING - J WEIGHT JEANS CLOTH COATING - CLOSED GRADE - NON-WATERPROOF BOND - RESIN OR GLUE SIZE - 50 YARD ROLL, 3 INCHES WIDE DESIGNED USE - METAL WORKING UNIT OF ISSUE - RO (50 YARD ROLL) ANSI B74.18 - SPECIFICATIONS FOR GRADING OF CERTAIN ABRASIVE ON COATED ABRASIVE PRODUCTS APPLICATION FOR COPIES OF ANSI STANDARDS SHOULD BE ADDRESSED TO THE AMERICAN NATIONAL STANDARDS INSTITUTE, 11 WEST 42ND STREET, NEW YORK, NY 10036. ASTM D 5035 - STANDARD TEST METHODS FOR BREAKING FORCE AND ELONGATION OF TEXTILE PRODUCTS (STRIP FORCE) ASTM E 29 - STANDARD PRACTICE FOR USING DIGITS IN TEST DATA TO DETERMINE CONFORMANCE WITH SPECIFICATIONS APPLICATION FOR COPIES OFASTM STANDARDS SHOULD BE ADDRESSED TO ASTM, 100 BARR HARBOR DRIVE, WEST CONSHOHOCKEN, PA 19428-2959. THE DOCUMENTS REFERENCED IN THIS PURCHASE DESCRIPTION SHALL BE THE ISSUES IN EFFECT ON THE DATE OF ISSUANCE OF THE INVITATION FOR BIDS OR REQUEST FOR PROPOSALS. IN THE EVENT OF A CONFLICT BETWEEN THIS PURCHASE DESCRIPTION AND A DOCUMENT REFERENCED HEREIN, THIS PURCHASE DESCRIPTION SHALL TAKE PRECEDENCE. ABRASIVE GRAIN: THE ABRASIVE GRAIN SHALL BE CRUSHED AND GRADED IN ACCORDANCE WITH ANSI B74.18. SHALL BE EVENLY DISPERSED AND COMPLETELY COVER THE SURFACE OF THE BACKING. ADHESIVE: ANY GOOD QUALITY ADHESIVE IS ACCEPTABLE PROVIDING THAT DISLODGING OF ABRASIVE GRAIN IS MINIMIZED. ABRASIVE COVERAGE: OPEN COAT - 50 TO 70% COVERAGE, EVENLY DISPERSED CLOSED COAT - COMPLETE AND UNIFORM COVERAGE CLOTH BACKING MATERIAL: THE TREATED CLOTH BACKING MATERIAL SHALL BE IN ACCORDANCE WITH TABLE 1 AND TESTED IN ACCORDANCE WITH ASTM D 5035. WHEN WATERPROOF MATERIAL IS SPECIFIED, THE BACKING MATERIAL SHALLBE TREATED TO MAKE IT IMPERVIOUS TO WATER. TABLE I COATED CLOTH BACKING AVERAGE BREAKING STRENGTH TYPE BACKING WEIGHT WARP DIRECTION FILLING DIRECTION (LBS PER SQUARE INCH MINIMUM) JEANS CLOTH J WEIGHT 80 LBS/IN 35 LBS/IN DRILLS CLOTH X WEIGHT 130 LBS/IN 50 LBS/IN HEAVY DRILLS CLOTH Y WEIGHT 160 LBS/IN 65 LBS/IN NOTE: TOLERANCE PLUS OR MINUS 15% WORKMANSHIP. THE GRAIN SHALL BE EVENLY DISPERSED THROUGHOUT THE OPEN OR CLOSED COATED TYPE ROLL AS SPECIFIED. THE ROLL SHALL BE DESIGNED TO PRECLUDE DISINTEGRATION OF THE BACKING MATERIAL AND INSURE POSITIVE BONDING TO PREVENT DISLODGING OF THE GRAIN MATERIAL FROM THE BACKING DURING NORMAL USE. PRODUCT CONFORMANCE: THE PRODUCTS PROVIDED SHALL MEET THE SALIENT CHARACTERISTICS OF THIS ITEM PURCHASE DESCRIPTION, CONFORM TO THE PRODUCER' S OWN DRAWINGS, SPECIFICATIONS, STANDARDS, AND QUALITY ASSURANCE PRACTICES, AND BE THE SAME PRODUCT OFFERED FOR SALE IN THE COMMERCIAL MARKET. THE GOVERNMENT RESERVES THE RIGHT TO REQUIRE PROOF OF SUCH CONFORMANCE. MARKING: SHIPMENTS TO GSA AND OTHER CIVILIAN AGENCIES SHALL BE MARKED IN ACCORDANCE WITH FED-STD-123. SHIPMENTS TO THE DEPARTMENT OF DEFENSE (DOD) SHALL BE MARKED IN ACCORDANCE WITH MIL-STD-129. DATA SUBMISSION: THE MATERIAL SAFETY DATA SHEET (MSDS) SHALL BE SUBMITTED IN ACCORDANCE WITH THE LATEST REVISION OF FEDERAL STANDARD NO. 313. FOR SHIPMENTS TO GSA DISTRIBUTION CENTERS OR CUSTOMER SUPPLY CENTERS, THE CONTRACTOR SHALL PROVIDE ONE COPY OF THE MSDS INSIDE OR AFFIXED TO THE OUTSIDE OF EACH TRANSPORT PACKAGE (AS DEFINED IN PARAGRAPH 1 OF FED-STD-123), IF AFFIXED OUTSIDE, THE MSDS MUST BE PLACED IN A WEATHER-RESISTANT ENVELOPE. PREPARATION FOR DELIVERY: THE ITEM(S) SHALL BE PACKAGED AND PACKED TO AFFORD ADEQUATE PROTECTION AGAINST PHYSICAL DAMAGE DURING SHIPMENT FROM THE SUPPLIER TO THE FIRST RECEIVING ACTIVITY. THE PACK SHALL COMPLY WITH THE R