ELECTRIC CARPET SHAMPOOER AND WITH BRUSHES, 120 VOLT AND 60 CYCLE. AWARDED IAW P/N C46000-00 AND GSA ADVANT…

Public award description

ELECTRIC CARPET SHAMPOOER AND WITH BRUSHES, 120 VOLT AND 60 CYCLE. AWARDED IAW P/N C46000-00 AND GSA ADVANTAGE PRICE FOLLOWING THE IPD, INCORPORATED AND MADE PART OF THIS ORDER L7 SHAMPOOER, CARPET, ELECTRIC: THE UNIT SHALL BE LISTED OR CERTIFIED IN ACCORDANCE WITH UNDERWRITERS LABORATORY, (UL) 561, WITH THE FOLLOWING REQUIREMENTS AND CHARACTERISTICS: TYPE - SHAMPOOER VACUUM MOTOR - 2HP, 3 STAGE VOLTAGE - 110-120 VAC, 60HZ, 15 AMP (MAX) POWER CORD - 50 FT. (MIN) SHAMPOOER PERFORMANCE CRITERIA: COVERAGE - 2500 SQ. FT. PER HOUR (MAX) WATERLIFT - 118 INCHES @99 CFM BRUSH SPEED - 1800 RPM CLEANING PATH - 17 INCHES (MIN) THE CARPET SHAMPOOER SHALL BE A WHEELED, HAND-PUSHED MACHINE WITH ELECTRIC MOTOR(S), AND SHALL PERFORM THE FOLLOWING CLEANING OPERATIONS UNDER ITS OWN POWER (I.E. ELECTRICALLY, NOT MANUALLY): THE CARPET SHAMPOOER(S) SHALL PRODUCE AND DISPENSE A DETERGENT SHAMPOO OUT OF AN EASILY DRAINED AND CLEANED SOLUTION TANK, SHALL BRUSH THE SHAMPOO INTO THE CARPET, SHALL REMOVE THE DIRTY FOAM BY VACUUM ACTION, AND SHALL DEPOSIT THE RECOVERED SOLUTION INTO AN EASILY DRAINED AND CLEANED RECOVERY TANK. THE MOTOR(S), PUMP(S), SWITCHES AND ALL CONTROLS SHALL BE DESIGNED TO OPERATE FROM A 110-120 VAC, 60 HZ, SINGLE PHASE POWER SUPPLY. SWITCHES AND CONTROLS NECESSARY FOR MACHINE OPERATION SHALL BE LOCATED ON A PANEL OR NEAR THE HANDLE AND SHALL BE CONVENIENT TO THE OPERATOR. THE SHAMPOOER SHALL BE UL LISTED OR SHALL BE CERTIFIED BY A TESTING LABORATORY ACCEPTABLE TO THE GOVERNMENT AS CONFORMING TO UL 561, " SAFETY FLOOR-FINISHING MACHINES." THE POWER CORD SHALL BE A 3-CONDUCTOR (GROUNDED) CORD, 50 FEET (MINIMUM) LONG (MEASURED FROM THE POINT OF EXIT FROM THE CASE TO THE END OF THE PLUG), WITH A 3-PRONG PLUG AND INCLUDE A CORD STRAIN RELIEF. THE SCRUBBING BRUSH(S) FURNISHED WITH THE SHAMPOOER SHALL BE INTENDED FOR USE WITH THE SUPPLIED MACHINE IN THE AFOREMENTIONED OPERATION. THE BRUSH(S) SHALL BE NYLON, POLYPROPYLENE, OR SIMILAR SYNTHETIC FIBER AND SHALL CLEAN A 17 INCH MINIMUM PATH. THE BRUSHES SHALL BE REPLACEABLE AND PRESSURE ADJUSTABLE TO ACCOMMODATE VARYING PILE THICKNESSES. SHALL INCLUDE ANY RELATED CONTROLS OR SWITCHES ASSOCIATED WITH THE BRUSH PRESSURE SYSTEM. THE UNIT HOUSING SHALL BE OF NON-FERROUS METAL OR NON-CORROSIVE POLYETHYLENE; THE SOLUTION TANK AND THE RECOVERY TANK SHALL BE OF SIMILAR CONSTRUCTION AND SHALL EACH HAVE A MINIMUM CAPACITY OF 7 GALLONS. THE UNIT SHALL INCORPORATE A VACUUM SHUT-OFF FLOAT AND INLET STRAINER(S). THE SHAMPOOER SHALL BE FURNISHED WITH A SET OF OPERATING INSTRUCTIONS AND A REPLACEMENT PARTS LISTING FOR EACH UNIT. IMAGE IS REPRESENTATIONAL. UNIT OF ISSUE: SHALL BE EA (ONE COMPLETE UNIT IN A PACKAGE). PRODUCT CONFORMANCE: THE PRODUCTS PROVIDED SHALL MEET THE SALIENT CHARACTERISTICS OF THIS PURCHASE DESCRIPTION, CONFORM TO THE PRODUCER S OWN DRAWINGS, SPECIFICATIONS, STANDARDS, AND QUALITY ASSURANCE PRACTICES AND BE THE SAME PRODUCT OFFERED FOR SALE IN THE COMMERCIAL MARKET. THE GOVERNMENT RESERVES THE RIGHT TO REQUIRE PROOF OF SUCH CONFORMANCE. MARKING: SHIPMENTS TO GSA AND OTHER CIVILIAN AGENCIES SHALL BE MARKED IN ACCORDANCE WITH FED-STD-123. SHIPMENTS TO THE DEPARTMENT OF DEFENSE (DOD) SHALL BE MARKED IN ACCORDANCE WITH MIL-STD-129. PREPARATION FOR DELIVERY: THE ITEM(S) SHALL BE PACKAGED AND PACKED TO AFFORD ADEQUATE PROTECTION AGAINST PHYSICAL DAMAGE DURING SHIPMENT FROM THE SUPPLIER TO THE FIRST RECEIVING ACTIVITY. THE PACK SHALL COMPLY WITH THE RULES AND REGULATIONS APPLICABLE TO THE MODE OF TRANSPORTATION. THE PACKAGE SHALL BE THE SAME AS THAT NORMALLY PROVIDED BY THE SUPPLIER. IN THE EVENT A PALLET OR SKID IS USED FOR SHIPPING, THE FOLLOWING NOTICE SHALL APPLY: NOTICE OF SPECIAL REQUIREMENTS FOR SHIPMENT TO ALL COUNTRIES THAT HAVE ENDORSED THE IPPC GUIDELINES FOR TREATMENT OF NON-MANUFACTURED WOOD PACKAGING: THE INTERNATIONAL PLANT PROTECTION CONVENTION (IPPC) HAS APPROVED AND PUBLISHED ON MARCH 15, 2002, GUIDELINES FOR REGULATING WOOD PACKAGING MATE