WHEEL,ABRASIVE AWARD MADE IAW GSA ADVANTAGE GS-21F-0041U P/N DW8306 DATED 04/08/2011 INCORPORATED AND MADE…

Public award description

WHEEL,ABRASIVE AWARD MADE IAW GSA ADVANTAGE GS-21F-0041U P/N DW8306 DATED 04/08/2011 INCORPORATED AND MADE PART OF THIS AWARD-L5 WHEEL, ABRASIVE: THE WHEELS ARE DESIGNED FOR USE WITH RIGHT ANGLE OR VERTICAL GRINDERS IN BLENDING WELDS, DEBURRING AND SURFACE FINISHING. SHALL BE IN ACCORDANCE WITH THE FOLLOWING REQUIREMENTS AND CHARACTERISTICS: TYPE - PLAIN, FLAT ABRASIVE - ZIRCONIA GRIT - 36 BACKING - CLOTH THICKNESS - 1/8 INCH ARBOR HOLE - 0.875 INCH DIAMETER WHEEL DIAMETER - 4.500 INCHES GRINDING ANGLE - 10 TO 25 DEGREES SPEED RATING - 13300 RPM DESIGNED USE - METAL WORKING UNIT OF ISSUE - PG (5 WHEELS PER PACKAGE) ANSI B7.1 - SAFETY REGULATIONS FOR THE USE, CARE AND PROTECTION OF ABRASIVE WHEELS ANSI B74.2 - SPECIFICATIONS FOR SHAPES AND SIZES OF GRINDING WHEELS AND FOR THE SHAPES AND IDENTIFICATION OF MOUNTED WHEELS ANSI B 74.12 - SPECIFICATIONS FOR THE SIZE OF ABRASIVE GRAIN- GRINDING WHEELS, POLISHING AND GENERAL USES APPLICATION FOR COPIES OF ANSI STANDARDS SHOULD BE ADDRESSED TO THE AMERICAN NATIONAL STANDARDS INSTITUTE, 1430 BROADWAY, NEW YORK, NY, 10018. ASTM E 29 - STANDARD PRACTICE FOR USING DIGITS IN TEST DATA TO DETERMINE CONFORMANCE WITH SPECIFICATIONS APPLICATION FOR COPIES OF ASTM STANDARDS SHOULD BE ADDRESSED TO ASTM, 100 BARR HARBOR DRIVE, WEST CONSHOHOCKEN, PA 19428-2959. THE DOCUMENTS/SPECIFICATIONS REFERENCED IN THIS PURCHASE DESCRIPTION SHALL BE THE ISSUES IN EFFECT ON THE DATE OF ISSUANCE OF THE INVITATION FOR BIDS OR REQUEST FOR PROPOSALS. IN THE EVENT OF A CONFLICT BETWEEN THIS PURCHASE DESCRIPTION AND A DOCUMENT REFERENCED HEREIN, THIS PURCHASE DESCRIPTION SHALL TAKE PRECEDENCE. PERFORMANCE REQUIREMENTS: THIS WHEEL IS UNIQUE AS IT PERFORMS GRINDING AND FINISHING IN ONE PASS. PRODUCT CONFORMANCE: THE PRODUCTS PROVIDED SHALL MEET THE SALIENT CHARACTERISTICS OF THIS DESCRIPTION, CONFORM TO THE PRODUCER' S OWN DRAWINGS, STANDARDS, AND QUALITY ASSURANCE PRACTICES AND BE THE SAME PRODUCT OFFERED FOR SALE IN THE COMMERCIAL MARKET. THE GOVERNMENT RESERVES THE RIGHT TO REQUIRE PROOF OF SUCH CONFORMANCE. MARKING: SHIPMENTS TO GSA AND OTHER CIVILIAN AGENCIES SHALL BE MARKED IN ACCORDANCE WITH FED-STD-123. SHIPMENTS TO THE DEPARTMENT OF DEFENSE (DOD) SHALL BE MARKED IN ACCORDANCE WITH MIL-STD-129. DATA SUBMISSION: THE MATERIAL SAFETY DATA SHEET (MSDS) SHALL BE SUBMITTED IN ACCORDANCE WITH THE LATEST REVISION OF FEDERAL STANDARD NO. 313. FOR SHIPMENTS TO GSA DISTRIBUTION CENTERS OR CUSTOMER SUPPLY CENTERS, THE CONTRACTOR SHALL PROVIDE ONE COPY OF THE MSDS INSIDE OR AFFIXED TO THE OUTSIDE OF EACH TRANSPORT PACKAGE (AS DEFINED IN PARAGRAPH 1 OF FED-STD-123), IF AFFIXED OUTSIDE, THE MSDS MUST BE PLACED IN A WEATHER-RESISTANT ENVELOPE. PREPARATION FOR DELIVERY: THE ITEM(S) SHALL BE PACKAGED AND PACKED TO AFFORD ADEQUATE PROTECTION AGAINST PHYSICAL DAMAGE DURING SHIPMENT FROM THE SUPPLIER TO THE FIRST RECEIVING ACTIVITY. THE PACK SHALL COMPLY WITH THE RULES AND REGULATIONS APPLICABLE TO THE MODE OF TRANSPORTATION. THE PACKAGE SHALL BE THE SAME AS THAT NORMALLY PROVIDED BY THE SUPPLIER. IN THE EVENT A PALLET OR SKID IS USED FOR SHIPPING, THE FOLLOWING NOTICE SHALL APPLY: NOTICE OF SPECIAL REQUIREMENTS FOR SHIPMENT TO ALL COUNTRIES THAT HAVE ENDORSED THE IPPC GUIDELINES FOR TREATMENT OF NON-MANUFACTURED WOOD PACKAGING: THE INTERNATIONAL PLANT PROTECTION CONVENTION (IPPC) HAS APPROVED AND PUBLISHED ON MARCH 15, 2002, GUIDELINES FOR REGULATING WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE . COUNTRIES ENDORSING THE IPPC GUIDELINES ARE FOUND AT HTTP://WWW.APHIS.USDA.GOV/PPQ/SWP/. ADDITIONALLY, SHIPMENTS DELIVERED TO DOD DISTRIBUTION FACILITIES OR FREIGHT CONSOLIDATION POINTS FOR EVENTUAL DELIVERY TO OR THROUGH EU/IPPC COUNTRIES SHALL COMPLY WITH APPLICABLE DLA REGULATIONS AND PROCUREMENT LETTER PROCLTR 02-17."