SCOPE OF WORK AT 7X10. PROVIDE LABOR, MATERIALS, AND EQUIPMENT TO: LEAD CONTAINING PAINT AT LOCATIONS 1 THR…

Public award description

SCOPE OF WORK AT 7X10. PROVIDE LABOR, MATERIALS, AND EQUIPMENT TO: LEAD CONTAINING PAINT AT LOCATIONS 1 THRU 7 TO BE REMOVED BY Z-CON. *WORK TO BE PERFORMED TO EPA AND OSHA REGULATIONS. FULLY PROTECTED WORK FORCE. CONTAINED WORK AREA. ALL WASTE TO BE DISPOSED OF ACCORDINGLY.* 1) REPAIR ROOF AND AIR DUCT WITH CIM (RUBBERIZED ROOFING MATERIAL). FIBER WRAP AIR DUCT. MAKE CRICKET AS LOW AS POSSIBLE. (EAST WALL) 2) ADD WELD WHERE WELD IS MISSING BETWEEN ESICTING WELDS. BOTH SIDES OF BEAM AT TOP. WATER NEEDS TO RUN AWAY FROM THE TOP OF THE BEAM. 3) ADD WELD WHERE WELD IS MISSING BETWEEN EXISTING WELDS. ON ONE SIDE OF BEAM AT TOP. WATER NEEDS TO RUN AWAY FROM THE TOP OF THE BEAM. 4) ADD WELD BETWEEN ESIXTING WELDS. (TWO ARE ON TOP OF MECHANICAL ROOM, SMALL WORK ARE) (LEFT SIDE) 5) CHECK SEAM FOR CRACKS AND REPAIR AS NEEDED. NEEDS TO BE CLEANED BEFORE CHECKING FOR CRACKS. (SOUTH SIDE NEAR HEALTH UNIT) 6) ADD WELD BETWEEN EXISTING WELDS. (TWO ARE ON TOP OF MECHANICAL ROOM, SMALL WORK ARE) (RIGHT SIDE) 7) CLEAN OFF THE TOP OF BEAM. WELD AS NEEDED AND MAKE BOTH AN ENDDRAIN. WATER TO RUN OFF THE BEAM.