INCREASING THE OPTICAL SURFACE FINISHING PRECISION AND REDUCING SURFACE ROUGHNESS WILL GREATLY BENEFIT ASTR…

Public award description

INCREASING THE OPTICAL SURFACE FINISHING PRECISION AND REDUCING SURFACE ROUGHNESS WILL GREATLY BENEFIT ASTRONOMY TELESCOPE AND OTHER OPTICAL SYSTEMS. CONVENTIONAL OPTICAL FINISHING ONLY DELIVERS ABOUT 1/10 LAMBDA SURFACE FLATNESS AND IS HARD TO HANDLE ARBITRARY SURFACE SHAPE. TO FINISH OPTICAL SURFACE WITH LOW COST TO AN ULTRA HIGH PRECISION AND TO REACH THE CAPABILITY OF GENERATING ARBITRARY SURFACE SHAPE SUCH AS THE ASPHERICAL SURFACES OR SPECIAL PATTERNS, IN THIS PROPOSAL, WE PROPOSE THE DEVELOPMENT OF AN INNOVATIVE COMPUTER-CONTROLLED OPTICAL SURFACE FINISHING SYSTEM. WE SUGGEST USING CHEMICAL REACTIVE REMOVAL AS THE TOOL TO REMOVE THE MATERIAL ON THE OPTICAL SURFACE, CONTROLLED BY COMPUTER WITH A DETERMINISTIC REMOVAL ALGORITHM. IN PHASE I, A PROTOTYPE SYSTEM WITH ULTRA HIGH PRECISION FINISHING CAPABILITY, ~ 1/100 LAMBDA (632.8NM) FOR SURFACE FIGURE AND ~1/1000 LAMBDA FOR RMS WILL BE DEMONSTRATED. A 5~10 TIMES IMPROVEMENT IN SURFACE ROUGHNESS IS EXPECTED OVER THE CURRENT TECHNIQUE AS THE CHEMICAL REMOVAL IS AT THE ATOMIC OR MOLECULAR LEVEL, RATHER THAN BY PARTICLE BOMBARDMENT ON OPTICAL SURFACE. THE LOWER SURFACE ROUGHNESS WILL OBVIOUSLY REDUCE THE SCATTERING LOSE FOR THE SHORT WAVELENGTH RANGE. IN PHASE II, WE WILL EXTEND THE WORK TO NON-FLAT SURFACES, IE, ARBITRARY SHAPED SURFACES, AND TO OTHER GLASSES AND MATERIALS OF INTEREST TO NASA.