IGF::OT::IGF MARS SAMPLE RETURN ASCENT VEHICLES REQUIRE A VELOCITY CHANGE EXCEEDING 4 KM/S WITHIN MINUTES O…

Public award description

IGF::OT::IGF MARS SAMPLE RETURN ASCENT VEHICLES REQUIRE A VELOCITY CHANGE EXCEEDING 4 KM/S WITHIN MINUTES OF LAUNCH AND HIGHER PROPELLANT MASS FRACTIONS THAN ARE OFFERED BY CURRENT PRESSURE-FED SATELLITE PROPULSION SYSTEMS. PUMP-FED SYSTEMS ARE POTENTIALLY LOW-MASS, BUT A SUITABLE HIGH-PRESSURE NITROGEN TETROXIDE/MONOMETHYL HYDRAZINE (NTO/MMH) BIPROPELLANT ROCKET ENGINE REMAINS TO BE DEVELOPED. THE STATE OF THE ART IN NTO/MMH COMBUSTION CHAMBERS IS IRIDIUM-LINED RHENIUM (IR/RE) MANUFACTURED BY ULTRAMET AND USED BY AEROJET IN ITS HIPAT ENGINE. IN PREVIOUS AND CURRENT WORK, ULTRAMET HAS DEMONSTRATED THE POTENTIAL FOR FABRICATION OF REFRACTORY METAL AND CERAMIC MATRIX COMPOSITE (CMC)-LINED CARBON/CARBON (C/C) COMPONENTS, THEREBY COMBINING THE BENEFITS OF THE REFRACTORY LINER WITH THE SUBSTANTIALLY REDUCED WEIGHT AND COST OF C/C. THE SHORTFALL OF USING C/C AS THE LIGHTWEIGHT STRUCTURE IS THE DISPARITY IN THERMAL EXPANSION, CAUSING HIGHLY STRESSED COMPONENTS. IN THIS PROJECT, ULTRAMET WILL DEMONSTRATE A PROCESSING ROUTE TO INTEGRALLY BOND LINERS OF A ZIRCONIUM CARBIDE (ZRC) CMC AND OF RHENIUM TO C/C THAT WILL BE APPLIED TO THE FABRICATION OF A MARS SAMPLE RETURN ASCENT ENGINE COMBUSTION CHAMBER. PHASE II WILL CULMINATE IN THE DESIGN AND FABRICATION OF A 1000-N, 500-PSI REFRACTORY-LINED C/C CHAMBER THAT WILL BE DELIVERED TO NASA. TO FACILITATE TESTING WITHIN PROJECT FUNDING RESOURCES, A 22-N 500-PSI REFRACTORY-LINED C/C CHAMBER WILL ALSO BE DESIGNED, FABRICATED, AND HOT-FIRE TESTED AT ONE OF THE MAJOR PROPULSION SYSTEM INTEGRATORS (AEROJET, MOOG-ISP, OR NORTHROP GRUMMAN), ALL OF WHICH HAVE EXPRESSED INTEREST IN TEAMING ON THE PROJECT.