IGF::OT::IGF COMMUNICATION TECHNOLOGIES SUPPORT ALL NASA SPACE MISSIONS, AMONG WHICH AUTONOMOUS COMMUNICATI…

Public award description

IGF::OT::IGF COMMUNICATION TECHNOLOGIES SUPPORT ALL NASA SPACE MISSIONS, AMONG WHICH AUTONOMOUS COMMUNICATION TECHNOLOGIES ARE EXTREMELY BENEFICIAL TO FUTURE MISSIONS, INCLUDING THE ASTEROID REDIRECT MISSION, AND HUMAN EXPEDITION TO MARS AND BEYOND. LOW-COST, HIGH GAIN, LIGHT-WEIGHT, AND FLEXIBLE ACTIVE ANTENNA SYSTEMS ARE HIGHLY DESIRED. IN THIS PROGRAM, WE PROPOSE TO DEVELOP A FULLY FLEXIBLE INK-JET PRINTED MONOLITHIC GRAPHENE-BASED HIGH FREQUENCY PAA COMMUNICATION SYSTEM. THE SUPERIOR ELECTRONIC, OPTICAL, MECHANICAL, AND THERMAL PROPERTIES OFFERED BY GRAPHENE (CARRIER MOBILITY ~ 200,000CM^2/V.S; OPTICAL TRANSPARENCY ~ 98%; HIGH CURRENT DENSITY ~ 10^8A/CM^2; THERMAL CONDUCTIVITY ~ 5000W/MK) IS EXPECTED TO SIGNIFICANTLY ENHANCE THE SYSTEM FEATURES COMPARED TO THE STATE-OFTHE- ART FLEXIBLE ANTENNA SYSTEMS., WITH OPERATING FREQUENCY IN EXCESS OF 100GHZ EXPECTED. IN PHASE I, WE PRINTED GRAPHENE FIELD-EFFECT TRANSISTORS AND DEMONSTRATED A HIGH (38:1) ON/OFF RATIO. GRAPHENE PATCH ANTENNAS WERE DEMONSTRATED WITH HIGHER GAIN THAN SILVER. RESULTS ALSO INDICATED THE FEASIBILITY OF REDUCING THE ANTENNA SIZE FOR A GIVEN FREQUENCY WITHOUT SACRIFICING THE GAIN. FINALLY, A 2-BIT 1X2 GRAPHENE PAA WAS FULLY PRINTED, AND BEAM STEERING OF A 4GHZ RF SIGNAL FROM 0 TO 42.4 DEGREES WAS DEMONSTRATED. THE ANTENNA SYSTEM ALSO SHOWED GOOD STABILITY AND TOLERANCE AFTER 5500 BENDING CYCLES. IN PHASE II, THE GRAPHENE MATERIAL INKS WILL BE FURTHER OPTIMIZED FOR ACHIEVING HIGH PERFORMANCE FETS AND CONDUCTIVE FILMS. A FULLY PACKAGED 4-BIT 2D 4X4 S-BAND PAA ON A FLEXIBLE SUBSTRATE WILL BE DEVELOPED, AND PERFORMANCE FEATURES, INCLUDING GAIN/EFFICIENCY, FREQUENCY RANGE, BANDWIDTH, POWER CONSUMPTION, AND LIFETIME/RELIABILITY, WILL BE CHARACTERIZED. ADDITIONALLY, A ROLL-TO-ROLL PROCESS TO SCALE-UP PRODUCTION WILL BE DEVELOPED, AND THE FEASIBILITY OF LARGE ANTENNA ARRAY MANUFACTURING AT LOWCOST WILL BE DEMONSTRATED.