Response deadline
Fri, May 15, 2026, 1:00 PM EDTSAM.gov listing
Camp Natural Bridge Griddles
Product Service Code
PSC 7310NAICS code
NAICS 333241Analyze This Opportunity in CaptureIQ
Compare your company's capabilities against this federal opportunity using CaptureIQ.
Opportunity details
- NAICS
- 333241
- Notice type
- Combined Synopsis/Solicitation
- Set-aside
- Total Small Business Set-Aside (FAR 19.5)
- Original posted
- May 11, 2026
- Last updated
- October 18, 2026
- Notice ID
- 8348909055d14944ab99fcecce146205
Summary
Amended to change NAICS. Heavy duty Propane gas griddle, stainless steel front, sides and front top ledge. Fully welded stainless and aluminized steel body frame. 11inch low profile cooking height on 6 inch legs.1 inch thick polished steel griddle plate with 12-gauge, 4inch stainless steel back and tapered side splashes ? Fully welded stainless and aluminized steel chassis frame ? 11 inch low profile cooking height on 4 inch adjustable legs ? 1 inch thick polished steel griddle plate with 12 gage, 10 inch stainless steel back and tapered side splashes ? Spatula wide 3-1/2 inch grease gutter and chute are fully welded for easier cleaning and to stop grease migration ? One 27,000 BTU/hr. U shaped aluminized steel burner for every 12 inch of griddle width ? One embedded snap action thermostat per burner with temperature adjust from 200 degree F to 550 degree F on Steel or Chrome plate; temperature adjusts from 200 degree F to 450 degree F on Rapid Recovery plate ?Large 6-quart stainless steel grease drawer (2 drawers on 60 inch and 72 inch models) ?Heavy duty chromed thermostat knob guards ? One pilot safety valve for every two burners; safety will completely shut off Propane gas to pilot and burners if pilot extinguishes ? Manual ignition ? Bottom heat shields ? ? inch rear Propane gas connection and Propane gas pressure regulator supplied with the unit must be installed ? Propane Gas10.0 inch (254 mm) W.C ?1 for each grill. Delivery to West Point NY Removal of current griddles Installation and start up of new griddles. Location of removal and installation are on 1st floor of building.
Read Full Official Summary
Amended to change NAICS. Heavy duty Propane gas griddle, stainless steel front, sides and front top ledge. Fully welded stainless and aluminized steel body frame. 11inch low profile cooking height on 6 inch legs.1 inch thick polished steel griddle plate with 12-gauge, 4inch stainless steel back and tapered side splashes ? Fully welded stainless and aluminized steel chassis frame ? 11 inch low profile cooking height on 4 inch adjustable legs ? 1 inch thick polished steel griddle plate with 12 gage, 10 inch stainless steel back and tapered side splashes ? Spatula wide 3-1/2 inch grease gutter and chute are fully welded for easier cleaning and to stop grease migration ? One 27,000 BTU/hr. U shaped aluminized steel burner for every 12 inch of griddle width ? One embedded snap action thermostat per burner with temperature adjust from 200 degree F to 550 degree F on Steel or Chrome plate; temperature adjusts from 200 degree F to 450 degree F on Rapid Recovery plate ?Large 6-quart stainless steel grease drawer (2 drawers on 60 inch and 72 inch models) ?Heavy duty chromed thermostat knob guards ? One pilot safety valve for every two burners; safety will completely shut off Propane gas to pilot and burners if pilot extinguishes ? Manual ignition ? Bottom heat shields ? ? inch rear Propane gas connection and Propane gas pressure regulator supplied with the unit must be installed ? Propane Gas10.0 inch (254 mm) W.C ?1 for each grill. Delivery to West Point NY Removal of current griddles Installation and start up of new griddles. Location of removal and installation are on 1st floor of building.
Related Federal Opportunities
Why this matters
- This notice is a combined synopsis/solicitation.
- The listed response deadline is May 15, 2026.
- 4 related opportunities share this NAICS.
Related federal terms
Market context
4 Related OpportunitiesMatching opportunities on RFPCapture