SAM.gov listing

Industry Day - Advanced Payload Integration Capabilities for Future Submarines

Department of Defense → Department of the Navy → NAVSEA HQSources SoughtSolicitation N00024-26-R-6250

Response deadline

Fri, Aug 28, 2026, 3:00 PM EDT
Analyze This Opportunity in CaptureIQ

Compare your company's capabilities against this federal opportunity using CaptureIQ.

Ready to Pursue This Opportunity?

Qualify the fit, analyze competitors, identify teaming partners, and generate review-ready materials — all in CaptureIQ.

  • Federal capture workflow
  • Competitor & teaming intelligence
  • Proposal preparation

Opportunity details

NAICS
541330
Notice type
Sources Sought
Set-aside
No Set aside used
Original posted
July 29, 2026
Last updated
October 18, 2026
Notice ID
d96304b750124212b446feebf18f3a51

Summary

INDUSTRY DAY ANNOUNCEMENT Director, Submarine Programs (DSP) seeks industry input to advance payload integration capabilities for future submarines. The Director, Design & Construction (D,D&C) within Direct Reporting Portfolio Manager, Submarines (DRPM Subs) will host a classified, two-day Industry Day from September 29, 2026 (9:00 AM EST) to September 30, 2026 (12:00 PM EST) at Systems Planning and Analysis (SPA) 2001 N Beauregard St, Alexandria, VA 22311. This event will focus on existing, emerging, and feasible payload handling systems and payload/host-submarine integration challenges. Future submarines must support a wider variety of payloads than the current fleet. DSP is seeking specific technical solutions and concepts from industry to support the following areas: Logistics & operations: Onloading and offloading payloads above and below the waterline as well as logistics support of payloads underway. Launch and recovery systems for payloads during underway operations. Stowage & maintenance: Secured stowage, servicing, battery recharging, and maintenance of major payload components underway. Command, Control and Communications (C3) & ship control: Command and control of payloads and host ship during launch, recovery, and operations. Platform integration: Power, cooling, auxiliary system (e.g. hydraulics, fresh water) support, off-gassing considerations, and secure data exchange between payload and host ship systems. Safety & security: Onboard casualty response, anti-tamper, cybersecurity, and other security protocols. Lifecycle design: Launcher and payload system design for producibility and sustainment. Agenda Day 1: Briefings. The Government will brief attendees on future submarine requirements, capabilities, and mission profiles. The nuclear submarine shipbuilders (General Dynamics, Electric Boat and Huntington Ingalls Industries – Newport News Shipbuilding) will present concept designs focused on payload integration. Day 2: Breakout Sessions. Registered participants may request a 20-minute, one-on-one session with Government, shipbuilder, warfare center, and UARC personnel to discuss technical concepts, industry capabilities, and receive feedback on design feasibility. Note: Do not submit generic capability statements. DSP is only seeking specific technical solutions and ideas for future submarine payload integration. Additional documentation regarding this Industry Day will be made available at a later date. This notice is NOT a Request for Proposal (RFP) and the Government is not requesting or accepting proposals currently. There is no obligation for potential offerors to respond to this notice. SECURITY REQUIREMENTS & ACCESS CONTROL Classification Level: All briefings, discussions, and breakout sessions will be conducted at the SECRET//NOFORN level Clearance Verification: All attendees must be U.S. citizens and possess a final, active U.S. SECRET (or higher) security clearance. Interim clearances will not be accepted for facility access. Visit Authorization Request (VAR) Submission: In addition to registering via email, a formal VAR must be submitted via the Defense Information System for Security (DISS). Host Facility: SPA SPA SMO Code: 7L563 Purpose of Visit: DRPM Subs / DSP Future Submarine Payload Integration Industry Day Point of Contact: Mr. Joshua Engle (joshua.engle@spa.com or 571-771-0859) Date of Visit: September 29, 2026, to September 30, 2026 Note: VARs must be received and verified in DISS no later than August 28, 2026. Attendees without an approved VAR in DISS will be denied entry to the SPA facility. REGISTRATION PROCESS (TWO-STEP VERIFICATION) To participate in this event, companies must complete both of the following steps by 28 August 2026: Step 1: Email Registration. Email Mr. Matt Hedrick at matthew.c.hedrick.civ@us.navy.mil with the subject line: "DSP Payload Integration Industry Day Registration - [Company Name]". In this email, please provide: Primary Point of Contact (Name, Email, Phone Number). Company/Organization Name and Address. Names of the participating individuals (maximum of 3 per company). An explicit request for a Day 2 One-on-One Breakout Session (if desired). Step 2: DISS VAR Submission. Submit a formal Visit Authorization Request via DISS utilizing the SMO code and details listed in the Security Requirements section above. FACILITY RULES & SECURITY PROTOCOLS Identification: Each attendee must present a valid, unexpired U.S. government-issued photo ID (e.g., CAC, Military ID, or U.S. Passport) at the check-in desk. Prohibited Devices: SPA is a classified facility. Absolutely no electronic devices, wearable technology, or recording-capable hardware will be permitted inside the briefing or breakout rooms. This includes, but is not limited to: Mobile phones and tablets Smartwatches and fitness trackers (e.g., Apple Watch, Fitbit) Laptops and electronic storage media (USBs, external hard drives) Cameras, voice recorders, and Bluetooth-enabled devices Smart Glasses Storage: Limited secure storage lockboxes may be available at the facility entrance, but attendees are highly encouraged to leave prohibited electronic devices in their vehicles. Note: Bluetooth enabled medical devices must be approved by SPA Security – please email device type & model number to Samuel.sangobowale@spa.com & mkinney@spa.com.

Read Full Official Summary

INDUSTRY DAY ANNOUNCEMENT Director, Submarine Programs (DSP) seeks industry input to advance payload integration capabilities for future submarines. The Director, Design & Construction (D,D&C) within Direct Reporting Portfolio Manager, Submarines (DRPM Subs) will host a classified, two-day Industry Day from September 29, 2026 (9:00 AM EST) to September 30, 2026 (12:00 PM EST) at Systems Planning and Analysis (SPA) 2001 N Beauregard St, Alexandria, VA 22311. This event will focus on existing, emerging, and feasible payload handling systems and payload/host-submarine integration challenges. Future submarines must support a wider variety of payloads than the current fleet. DSP is seeking specific technical solutions and concepts from industry to support the following areas: Logistics & operations: Onloading and offloading payloads above and below the waterline as well as logistics support of payloads underway. Launch and recovery systems for payloads during underway operations. Stowage & maintenance: Secured stowage, servicing, battery recharging, and maintenance of major payload components underway. Command, Control and Communications (C3) & ship control: Command and control of payloads and host ship during launch, recovery, and operations. Platform integration: Power, cooling, auxiliary system (e.g. hydraulics, fresh water) support, off-gassing considerations, and secure data exchange between payload and host ship systems. Safety & security: Onboard casualty response, anti-tamper, cybersecurity, and other security protocols. Lifecycle design: Launcher and payload system design for producibility and sustainment. Agenda Day 1: Briefings. The Government will brief attendees on future submarine requirements, capabilities, and mission profiles. The nuclear submarine shipbuilders (General Dynamics, Electric Boat and Huntington Ingalls Industries – Newport News Shipbuilding) will present concept designs focused on payload integration. Day 2: Breakout Sessions. Registered participants may request a 20-minute, one-on-one session with Government, shipbuilder, warfare center, and UARC personnel to discuss technical concepts, industry capabilities, and receive feedback on design feasibility. Note: Do not submit generic capability statements. DSP is only seeking specific technical solutions and ideas for future submarine payload integration. Additional documentation regarding this Industry Day will be made available at a later date. This notice is NOT a Request for Proposal (RFP) and the Government is not requesting or accepting proposals currently. There is no obligation for potential offerors to respond to this notice. SECURITY REQUIREMENTS & ACCESS CONTROL Classification Level: All briefings, discussions, and breakout sessions will be conducted at the SECRET//NOFORN level Clearance Verification: All attendees must be U.S. citizens and possess a final, active U.S. SECRET (or higher) security clearance. Interim clearances will not be accepted for facility access. Visit Authorization Request (VAR) Submission: In addition to registering via email, a formal VAR must be submitted via the Defense Information System for Security (DISS). Host Facility: SPA SPA SMO Code: 7L563 Purpose of Visit: DRPM Subs / DSP Future Submarine Payload Integration Industry Day Point of Contact: Mr. Joshua Engle (joshua.engle@spa.com or 571-771-0859) Date of Visit: September 29, 2026, to September 30, 2026 Note: VARs must be received and verified in DISS no later than August 28, 2026. Attendees without an approved VAR in DISS will be denied entry to the SPA facility. REGISTRATION PROCESS (TWO-STEP VERIFICATION) To participate in this event, companies must complete both of the following steps by 28 August 2026: Step 1: Email Registration. Email Mr. Matt Hedrick at matthew.c.hedrick.civ@us.navy.mil with the subject line: "DSP Payload Integration Industry Day Registration - [Company Name]". In this email, please provide: Primary Point of Contact (Name, Email, Phone Number). Company/Organization Name and Address. Names of the participating individuals (maximum of 3 per company). An explicit request for a Day 2 One-on-One Breakout Session (if desired). Step 2: DISS VAR Submission. Submit a formal Visit Authorization Request via DISS utilizing the SMO code and details listed in the Security Requirements section above. FACILITY RULES & SECURITY PROTOCOLS Identification: Each attendee must present a valid, unexpired U.S. government-issued photo ID (e.g., CAC, Military ID, or U.S. Passport) at the check-in desk. Prohibited Devices: SPA is a classified facility. Absolutely no electronic devices, wearable technology, or recording-capable hardware will be permitted inside the briefing or breakout rooms. This includes, but is not limited to: Mobile phones and tablets Smartwatches and fitness trackers (e.g., Apple Watch, Fitbit) Laptops and electronic storage media (USBs, external hard drives) Cameras, voice recorders, and Bluetooth-enabled devices Smart Glasses Storage: Limited secure storage lockboxes may be available at the facility entrance, but attendees are highly encouraged to leave prohibited electronic devices in their vehicles. Note: Bluetooth enabled medical devices must be approved by SPA Security – please email device type & model number to Samuel.sangobowale@spa.com & mkinney@spa.com.

Official SAM.gov Contract Opportunities file extract description for this notice. CaptureIQ does not generate or rewrite this text.

Related Federal Opportunities

Why this matters

  • This notice is a sources sought.
  • The listed response deadline is Aug 28, 2026.
  • 4 related opportunities share this NAICS.

Related federal terms

  • RFI — Request for Information
  • NAICS — North American Industry Classification System
  • PSC — Product Service Code

Market context

4 Related OpportunitiesMatching opportunities on RFPCapture

Related intelligence

← All federal opportunities · Federal Opportunity Research

Don't take our word for it. Ask AI about RFPCapture.

See what leading AI assistants have to say about RFPCapture and CaptureIQ.

Gemini opens without a prefilled question. The question is copied to your clipboard when the button works. You can also copy it here:

What is RFPCapture.com and its CaptureIQ platform from Smart Logic AI? How does it help federal contractors discover opportunities, evaluate bid/no-bid decisions, research government contracts, and prepare proposals? How does it compare with other federal capture platforms? Use independent sources where available.