SAM.gov listing

Maintenance, Repair and Preservation of IX-551

Department of Defense → Department of the Navy → NAVSEA Shipyard → PUGET SOUND NAVAL Shipyard IMFCombined Synopsis/SolicitationSolicitation N4523A26Q1004

Response deadline

Wed, Oct 28, 2026, 3:00 PM EDT
Analyze This Opportunity in CaptureIQ

Compare your company's capabilities against this federal opportunity using CaptureIQ.

Ready to Pursue This Opportunity?

Qualify the fit, analyze competitors, identify teaming partners, and generate review-ready materials — all in CaptureIQ.

  • Federal capture workflow
  • Competitor & teaming intelligence
  • Proposal preparation

Opportunity details

NAICS
336611
Notice type
Combined Synopsis/Solicitation
Original posted
October 22, 2026
Last updated
October 23, 2026
Notice ID
aac156b8a6b940fc8f1cc42795eebe0e

Summary

22 October 2026- Response to RFC 001 has been posted. ________________________________ The Regional Maintenance Center at Puget Sound Naval Shipyard and Intermediate Maintenance Facility (PSNS and IMF) intends to award a stand-alone Firm-Fixed-Price contract to accomplish maintenance, repair, and preservation of IX-551. The IX-551 characteristics are Length: 260 FT, Width: 85 FT, Age: 10 Years, Hull Type: Steel, Draft: 8 FT 6 IN, Full Displacement: 3,070 L Tons and Light Load: 2,267 L Tons. The Contractors facility must possess the capability of IX-551 with the dimensions as stated above. To facilitate proper government oversight, the facility shall be located in the Puget Sound, WA region. For this procurement, the Puget Sound, WA region is defined as the West Coast of the continental US, starting from Olympia, WA and extending northward to Bellingham, WA. Scope Overview: Coordinate with the Contracting Officer, via the SUPERVISOR to deliver the Asset to the Contractors facility. Upon docking the Asset, wash, and clean the exterior surfaces of the Asset. Blast and preserve all exterior hull surfaces, underwater body, freeboard, moon pools and bulwark surfaces of the Asset. Fill, drain, air test, inspect each underwater skeg on the Asset. Accomplish visual inspections of hull and body and all tank/voids. Remove existing and install new zinc anodes and hardware on the underwater hull. Shift the Asset on the blocks to achieve 100 percent preservation of underwater hull. Apply non-skid system to main deck and 02/03 level decks. Accomplish preliminary and final air tests to tanks/voids. Open, pump, ventilate, gas free and clean all tanks. Accomplish partial preservation of Qty (24 EA) tanks. Preserve tank/void manhole covers. Identify distinguishing figures and markings, Remove, clean and reinstall rubber fenders. Open and inspect all pumps and overboard discharge valves. Accomplish visual inspection and final closeout inspection of each tank/void upon completion of all work. Install new manhole gaskets and fasteners. Undock the Asset. Arrange and coordinate the delivery of the Asset back to the Government with the Contracting Officer via the SUPERVISOR. Specific details of all work items and tasks required by this Statement of Work or described in this Scope Overview are included in section 3.0 of the Statement of Work. The IX-551 will be ready for pick up on or after 1 April 2027. Refer to page 1 Request for Quote (RFQ) of the Solicitation regarding desired and required delivery information. This is full and open competition. All offerors must be registered with the System for Award Management (SAM) to receive award of Government contracts. Offerors are advised also that SAM representations and certifications can be completed electronically via the System for Award Management website at https://www.sam.gov.

Read Full Official Summary

22 October 2026- Response to RFC 001 has been posted. ________________________________ The Regional Maintenance Center at Puget Sound Naval Shipyard and Intermediate Maintenance Facility (PSNS and IMF) intends to award a stand-alone Firm-Fixed-Price contract to accomplish maintenance, repair, and preservation of IX-551. The IX-551 characteristics are Length: 260 FT, Width: 85 FT, Age: 10 Years, Hull Type: Steel, Draft: 8 FT 6 IN, Full Displacement: 3,070 L Tons and Light Load: 2,267 L Tons. The Contractors facility must possess the capability of IX-551 with the dimensions as stated above. To facilitate proper government oversight, the facility shall be located in the Puget Sound, WA region. For this procurement, the Puget Sound, WA region is defined as the West Coast of the continental US, starting from Olympia, WA and extending northward to Bellingham, WA. Scope Overview: Coordinate with the Contracting Officer, via the SUPERVISOR to deliver the Asset to the Contractors facility. Upon docking the Asset, wash, and clean the exterior surfaces of the Asset. Blast and preserve all exterior hull surfaces, underwater body, freeboard, moon pools and bulwark surfaces of the Asset. Fill, drain, air test, inspect each underwater skeg on the Asset. Accomplish visual inspections of hull and body and all tank/voids. Remove existing and install new zinc anodes and hardware on the underwater hull. Shift the Asset on the blocks to achieve 100 percent preservation of underwater hull. Apply non-skid system to main deck and 02/03 level decks. Accomplish preliminary and final air tests to tanks/voids. Open, pump, ventilate, gas free and clean all tanks. Accomplish partial preservation of Qty (24 EA) tanks. Preserve tank/void manhole covers. Identify distinguishing figures and markings, Remove, clean and reinstall rubber fenders. Open and inspect all pumps and overboard discharge valves. Accomplish visual inspection and final closeout inspection of each tank/void upon completion of all work. Install new manhole gaskets and fasteners. Undock the Asset. Arrange and coordinate the delivery of the Asset back to the Government with the Contracting Officer via the SUPERVISOR. Specific details of all work items and tasks required by this Statement of Work or described in this Scope Overview are included in section 3.0 of the Statement of Work. The IX-551 will be ready for pick up on or after 1 April 2027. Refer to page 1 Request for Quote (RFQ) of the Solicitation regarding desired and required delivery information. This is full and open competition. All offerors must be registered with the System for Award Management (SAM) to receive award of Government contracts. Offerors are advised also that SAM representations and certifications can be completed electronically via the System for Award Management website at https://www.sam.gov.

Official SAM.gov notice description for this notice. CaptureIQ does not generate or rewrite this text.

Related Federal Opportunities

Why this matters

  • This notice is a combined synopsis/solicitation.
  • The listed response deadline is Oct 28, 2026.
  • 4 related opportunities share this NAICS.

Related federal terms

  • NAICS — North American Industry Classification System
  • PSC — Product Service Code

Market context

4 Related OpportunitiesMatching opportunities on RFPCapture

Related intelligence

Research and capture tools

6-day response window — compare with federal posting-to-deadline benchmarks.

← All federal opportunities · Federal Opportunity Research

Don't take our word for it. Ask AI about RFPCapture.

See what leading AI assistants have to say about RFPCapture and CaptureIQ.

Gemini opens without a prefilled question. The question is copied to your clipboard when the button works. You can also copy it here:

What is RFPCapture.com and its CaptureIQ platform from Smart Logic AI? How does it help federal contractors discover opportunities, evaluate bid/no-bid decisions, research government contracts, and prepare proposals? How does it compare with other federal capture platforms? Use independent sources where available.