Acoustical Signature Analysis for In-Situ Monitoring and Quality Control for In-Space Additive Manufacturing

Parts manufactured by additive manufacturing (AM) typically suffer from a combination of defect types that can inhibit the functional performance of a part. Most AM parts inspection methods are destructive, time-consuming, complex, expensive, do not perform in-situ, and are not easily applicable in space. This Phase I SBIR proposes to develop a non-destructive evaluation method based upon acoustical signatures that can perform in space, in-situ, and post production and is equally applicable to both metallic and non-metallic AM. Laser Doppler vibrometry is combined with vibrational resonance spectroscopy to extract acoustical information from exposed layers during the printing process to characterize the part. The Phase I work will demonstrate feasibility by experiment and computer simulation. Component samples ranging from acceptable to unacceptable will be produced and fully analyzed with complex inspection and diagnostic tools to verify the mechanical and structural properties, and the associated acoustical signatures will be correlated with various stages of contamination and defects. We will determine how well the acoustical signature of a reference part can be used to certify additional parts arising from subsequent production. We will show how such a system can be interfaced with a printing machine and operated in a space environment.