Sintered Inductive Metal Printer with Laser Exposure

Techshot's innovative 3D metal printer offers the unique ability to fabricate metal components and tools in space which can be utilized for sustainability, maintenance and research. The proposed system will accomplish this task through the utilization of a two-stage filament melting process whereby a metallic filament is first heated to Curie temperature through induction and then deposited on a build platform where it is fused to the previous layer by exposure to a low energy laser. This new unique process is known as Sintered Metal Printing with Laser Exposure (SIMPLE). Induction heating is not entirely new to Fused Deposition Manufacturing (FDM). There has been recent research into the integration of an induction coil into the "hot end" of a plastic filament FDM printer. The induction coil surrounds the metal nozzle, known as the "hot end" and inductively heats the nozzle when an AC current is applied. The nozzle then heats and melts the plastic filament allowing it to be extruded onto a platform where a part is formed. The use of induction heating, when printing with a metal filament, is similar but the induction coil heats the wire filament directly as it passes through its center. This system offers faster melt times resulting in faster feed rates, lower mass resulting in quicker more accurate printer head movements and lower overall power consumption. Conceptually, the wire filament will not be heated to melting but heated to the Curie temperature and laid as a hot filament on the build platform. To gain adherence between deposited layers, a low energy laser is used simultaneous to the layering process to heat and fuse adjacent filament layers.