Cost Reduction of IMM Solar Cells by Recycling Substrates Using Wet Chemical Etching

This program focuses on reducing the cost of substrate reclaim for high-efficiency solar cells fabricated via an epitaxial lift-off (ELO) process, while increasing the number of reuse cycles possible for a given substrate. We will introduce a new multi-layer etch-stop structure into inverted metamorphic (IMM) triple-junction solar cells grown on 100-mm GaAs substrates. The etch-stop structure will be grown between the original GaAs substrate and the ELO release layer, thereby becoming the effective substrate surface after the ELO process. The purpose of the etch-stop structure is to prevent pits and surface damage incurred during ELO from damaging the original GaAs surface.The standard method of reclaiming the GaAs substrate after ELO is to employ chemo-mechanical polishing (CMP) to remove the defect-ridden GaAs surface and chemically polish the underlying GaAs to a yield surface that is suitable for successive epitaxial growth. This process works effectively but reduces resultant substrate thickness and causes some wafer damage itself, which then requires further polishing. These factors accumulate over time, practically limiting the number of reclaim cycles to 5?10 for a given substrate.With the incorporation of the proposed multi-layer etch-stop structure, the defects are isolated in the etch-stop structure, which can be dissolved by successive selective wet chemical etches to produce the original pristine GaAs surface with its original thickness. All mechanical polishing is eliminated in this proposed work, ensuring a constant substrate thickness through repeated substrate reclaim cycles and also drastically reducing the estimated cost of the recycling process to<$1 per substrate.