Iodine-Compatible Photocathode for RF Ion Thrusters

Iodine is highly attractive as an alternate electric propulsion propellant to xenon. It is easily stored in a compact volume on a spacecraft as a solid (greater than twice the storage density than pressurized xenon), which negates the need for a large pressurized tank. This, combined with its low cost and lower ionization energy, make iodine an ideal propellant for a smallsat electric thruster system. Busek currently is developing a line of gridded Radio-Frequency (RF) ion thrusters that utilize iodine as a propellant. In addition to their small size, the thrusters are low power and are compatible with solid-storable propellant iodine. This makes the BIT thruster line a mission-enabling technology for situations where volume and mass are highly constrained. The current generation of BIT thrusters use the BRFC-1, an RF-ion cathode to provide the neutralization current. The BRFC-1 consists of a miniaturized BIT-1 thruster, modified to extract electrons instead of ions. This cathode realization has three main limitations: Power processing complexity, feed system complexity, and reduced system Isp (due to the need to flow propellant to the cathode that does not generate thrust). We propose to develop a photocathode that will produce a current to both ignite and neutralize the Busek line of RF ion thrusters that is highly efficient and iodine compatible. A photocathode emits electrons when struck by an incident light beam. This cathode, when combined with an efficient UV light source, is predicted to significantly decrease the power requirements of the BIT thruster line while drastically improving Isp due to its propellantless operation. The proposed work will measure the quantum efficiency of specially-fabricated photocathodes before and after iodine exposure to evaluate their potential as an RF thruster neutralizer technology.