High-Power RF Window for Pulsed RF Accelerating Cavities

Modern accelerator facilities for Basic Energy Sciences (BES), such as the Spallation Neutron Source (SNS), require reliable high-power RF components. The RF vacuum window is a critical part of the waveguide couplers to the accelerating cavities. It is the point where the RF feed crosses the vacuum boundary and thus forms part of the confinement barrier. RF windows must be designed to have low power dissipation inside the ceramic, be resistant to mechanical stresses and free of discharges. In response to this problem, RadiaBeam proposes to develop a novel design and manufacturing process of high power RF windows that will be used in high average power accelerators. The design will be based on two innovations: use of modern dielectric materials with high permittivity and low loss tangent, and novel coating techniques of ceramics with gold/silver or graphene to reduce secondary electron yield and prevent charge build-up. In Phase I we will identify the ceramic candidates with low loss tangents, low secondary electron yield and large thermal expansion coefficients that better match the surrounding metallic wall structures. The RF design will be performed to match the window and achieve the above- mentioned parameters. We will then perform an engineering design of the window, including the cooling system, that will include self-consistent electromagnetic-thermal-structural analysis. The fabricated window prototype will be tested in a high power test stand at Los Alamos National Laboratory. The results of this work will be of an immediate benefit to the LANSCE facility and the window design can be scaled for lower frequency to operate at SNS at 402.5 MHz, SSRL at 476 MHz, ALS and NSLS-II at 500, APS at 352, etc. Also, the RF window is a universal component that is used in all accelerators, and the proposed design can be adapted for other frequency bands.